Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Reloading 380 acp

Discussion in 'Handloading and Reloading' started by vjay, Apr 2, 2009.

Thread Status:
Not open for further replies.
  1. vjay

    vjay Member

    Joined:
    Apr 2, 2009
    Messages:
    33
    Hello, new to this forum and reloading.
    I don't own a reloading manual right now, so I'am looking for some advice to reload 380acp for my CZ83.

    This is what I have:

    -IMR 700x
    -Hercules Green Dot
    -Hercules Red Dot
    -Hercules Herco

    -105gr lead bullets (I cast them myself)

    -CCI 500 small pistol primers


    I know bullseye and unique are more commonly used on this round, but its hard to get powder where I live, so I must work with what I currently own ;)
    So any starting load on those powders?

    Thanks in advance guys.
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    You really need to get some reloading manuals.
    It should be your first priority to buy some and read them before you get into reloading.

    Any info you get from the internet is risky, and from an unknown source usually.

    With that said:

    I'd try, at your own risk:
    700X = 2.0 Start - 2.5 MAX.
    Green Dot = 2.5 Start - 3.1 MAX.
    Red Dot = 2.0 Start - 2.8 MAX.

    I don't think Herco is going to work so hot.

    rc
     
  3. Marlin 45 carbine

    Marlin 45 carbine Member

    Joined:
    Jul 15, 2007
    Messages:
    2,477
    Location:
    South-Western North Carolina
    Red Dot will do well under a cast slug.
    get a manual or go to some web sites for data and work up until you find a load that functions and shoots well.
     
  4. bellyup039

    bellyup039 Member

    Joined:
    Apr 2, 2009
    Messages:
    102
    Location:
    Pittsburgh Area
    vJay,

    I just got back into reloading and have some manuals. But I also looked online
    If you go to the powder manufactures websites Most have the manual's on there.

    Try this link I got it from IMR's website.

    http://data.hodgdon.com/main_menu.asp
     
  5. vjay

    vjay Member

    Joined:
    Apr 2, 2009
    Messages:
    33
    Thanks guys, I think I'll get a manual asap.

    rcmodel, I might use those green dot loads meanwhile, many people so far, recommend me very similar numbers :)
     
  6. Steve H

    Steve H Member

    Joined:
    Nov 10, 2006
    Messages:
    1,328
    Location:
    Southern Utah
    get the book and read it at least twice and for .380 make sure you have REAL SMALL fingers
     
  7. bedwards1

    bedwards1 Member

    Joined:
    Mar 1, 2009
    Messages:
    57
    Location:
    Birmingham, Al.
    The 380 case is VERY fragile also. It will not tolerate much abuse. I loaded sr 4756 (don't remember what GR.) in mine under 100gr lead Magnus FPBB. I'm still waiting on my Lyman moulds. Had to adjust the OAL to feed in the Bersa magazine reliably.

    be
     
  8. Marlin 45 carbine

    Marlin 45 carbine Member

    Joined:
    Jul 15, 2007
    Messages:
    2,477
    Location:
    South-Western North Carolina
    Red Dot is similar in pressure and burn rate to Bullseye but has more 'bulk' and is cleaner IMO.
    it's the favorite of many .38spcl cast slug 'target load' shooters.
    it has done well in the several .380acp pistol I've owned under 95gr cast slugs.
    I'm not familiar with Green Dot, never used it but it's some slower than Red Dot.
     
  9. Byron

    Byron Member

    Joined:
    Jan 2, 2003
    Messages:
    1,027
    Location:
    TN
    Hornady manuals are good. Please do not make the .380 a 9MM. Stay within the limits of the manuals. Byron
     
  10. vjay

    vjay Member

    Joined:
    Apr 2, 2009
    Messages:
    33
    Thanks for all the help so far :D

    Probably a bit off topic, but, since I'll be shooting mostly lead cast bullets, which manuals should I get first?

    thanks
    vj
     
  11. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Lyman #49.

    Lyman Cast Bullet Handbook.

    Those are the only two manuals that have any lead bullet .380 ACP data worth having.

    rc
     
  12. edelbrock

    edelbrock Member

    Joined:
    Mar 2, 2009
    Messages:
    347
    Location:
    NC
    A good book to read for beginners is The ABC's of Reloading. I would recommend reading that before starting to reload anything. As far as the lead cast bullets, I have heard the Lyman manual has good lead cast data in it but I don't know for sure since I do not have it.
     
  13. ranger335v

    ranger335v Member

    Joined:
    Dec 3, 2006
    Messages:
    3,797
    Even without a manual, most powder companies put good loading data on their web sites.
     
  14. moooose102

    moooose102 Member

    Joined:
    Oct 21, 2007
    Messages:
    3,024
    Location:
    West Michigan
    You may not even have to buy a loading book. Our local library system has several different books available, and a website that makes ordering them easy. Check out your local library and see if you can borrow the info for free! That said, reloading manuals are an invaluable source. When i got into loading, i thought one was as good as another. Now, i have 6 different full blown manuals, plus several "magazine type" manuals. And i am certain i am not done yet. There is so much good information in them other than just load data. You just have to have some, and imo, the more, the better.
     
Thread Status:
Not open for further replies.

Share This Page