Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Reloading Die Questions (part 2)

Discussion in 'Handloading and Reloading' started by sgtredleg, May 1, 2012.

Thread Status:
Not open for further replies.
  1. sgtredleg

    sgtredleg Member

    Joined:
    Jan 3, 2003
    Messages:
    43
    Hey all,
    Thanks for the many helpful responses to my similar post yesterday. I'm learning alot.
    One responder asked for pics, so I'm going to see if this works. If it does any commenatry would be appreciated. I know there are some extra pieces in these sets, (in the .222 for instance) if anybody can ID these parts and use I'd appreciate it.
    I have more pics I can post of other dies if more info is needed.
     

    Attached Files:

  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    You have a .222/.223 shell holder.
    A .222/.223 size extended shell holder to use with the two shorter .222 case forming & trim dies.
    They are used to make .222 Rem brass out of .223 brass.

    Also an L.E. Wilson .222 case headspace gage.

    You also have a chamber cast in the die box somebody did of a rifle chamber for measuring purposes.

    rc
     
Thread Status:
Not open for further replies.

Share This Page