Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Reloading for 30 Remington

Discussion in 'Handloading and Reloading' started by Vacek, Sep 27, 2011.

Thread Status:
Not open for further replies.
  1. Vacek

    Vacek Member

    Joined:
    Sep 14, 2006
    Messages:
    316
    I picked up a real purty pre 1935 Remington 14. I am assuming I can use the 3030 reloading dies on this round as well...... correct:uhoh:
     
  2. res45

    res45 Member

    Joined:
    Sep 23, 2007
    Messages:
    550
    Location:
    North Carolina
    30 Rem. is basically a rimless version of the 30-30,most of the older reloading manuals I have list 30 Rem. and 30-30 data together.
     
  3. MMCSRET

    MMCSRET Member

    Joined:
    Feb 18, 2008
    Messages:
    2,961
    Location:
    North Central Montana, across the Wide Missouri
    The load data is the same, but the dies and shell holder are not interchangeable. You need a set of 30 Remington dies and a shell holder for it. I just sold mine last year. I had rifles chambered for both, still got my 30-30.
     
  4. Vacek

    Vacek Member

    Joined:
    Sep 14, 2006
    Messages:
    316
    Thanks for the info. It looks like RCBS are the only ones with full length resize dies. Time to do a little ordering.
     
Thread Status:
Not open for further replies.

Share This Page