Reloading for 351 WSL

Status
Not open for further replies.

Lu249

Member
Joined
Nov 7, 2020
Messages
78
I currently reload for my 1907 which is in .351 WSL. I use 350 legend brass and trim it down to the right length and it works but it gets tedious after a while. I have about 15 head stamped 351 JBA bullets that I got with the rifle. Wondering if anyone knows where to get any cheaper 351 brass. RCC sells it but it is like $5 a case and that’s just unreasonable in my opinion.
 

Attachments

  • 66C4E5CE-ABFB-4A88-87A2-8B4B32665DE6.jpeg
    66C4E5CE-ABFB-4A88-87A2-8B4B32665DE6.jpeg
    157.9 KB · Views: 21
A faster way to cut them? Chop saw? Nice looking cartridges. How do they work.
 
A faster way to cut them? Chop saw? Nice looking cartridges. How do they work.
They work great. 17 gr of 4227. 180 gr soft point bullets. I used a dewalt drill and loosened it all the way up and they put an unprimed case in there and tightened it on the case (it will not hurt it) then took a pipe cutter and put it on the case and turned on the drill on so it spins the case as it is being cut. Then just trimmed the cases after that
 
If you do not shoot the 351 all that much, as a brass scatterer, I would just make my brass from 223 military brass and process it. If it gets lost, no big deal, like the commercial high dollar fodder might be..
 
Status
Not open for further replies.
Back
Top