Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Reloder 10x in an AR 15...

Discussion in 'Handloading and Reloading' started by Ridgerunner665, Feb 23, 2008.

Thread Status:
Not open for further replies.
  1. Ridgerunner665

    Ridgerunner665 Member

    Joined:
    Feb 3, 2005
    Messages:
    3,393
    Location:
    Upper East Tennessee
    Anybody tried it?
    How did it work?
    Got any load data?
    How was the velocity?

    I got a pound that I'm going to try with 62 grain Barnes Triple Shock bullets, but there isn't much load data available. I was thinking 21.5 grains should be a safe start load...any suggestions?

    EDIT: sorry for the double tap...
     
  2. APIT50

    APIT50 Member

    Joined:
    Mar 7, 2008
    Messages:
    142
    Location:
    Cornhusker State
    can't tell you my load data but i tried it in my RRA and it shot fine with Hornady 52 grnHPBT match. The only thing is I use a Dillon 550B and the powder measure is still finicky even with the shorter stick of the
    10X.
    Barnes triple shock in a .223? Just curious what are you using it for?
     
  3. Ridgerunner665

    Ridgerunner665 Member

    Joined:
    Feb 3, 2005
    Messages:
    3,393
    Location:
    Upper East Tennessee
    I'm going to use it for deer and hogs...its legal here, and a very capable round...I've killed deer and hogs clean with a lot less.

    EDIT: I found my load...26 grains of Reloder 15 (NATO chamber), 2.26 OAL, 2,875 fps, very accurate load in my gun.
     
Thread Status:
Not open for further replies.

Share This Page