Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Removing barrel from stock for cleaning?

Discussion in 'Blackpowder' started by usmarine0352_2005, Dec 8, 2010.

Thread Status:
Not open for further replies.
  1. usmarine0352_2005

    usmarine0352_2005 Member

    Joined:
    Oct 21, 2005
    Messages:
    2,797
    .
    Some people say you should remove your barrel from the stock when you clean your muzzleloader.



    Is this really necessary and will it effect your accuracy?



    I have a T/C Omega and T/C Truimph.



    I would really like to not have to take the barrel apart from the stock everytime I clean it.


    I love my Omega, but I will say when I was cleaning it the trigger assembly kept moving up and down and I wore some of the bluing off of the top of 209 primer cap that covers it with my cleaning rod and that sort of made me mad. I wish it would lock in place so when you clean it you don't have that problem.

    .
     
  2. ontarget

    ontarget Member

    Joined:
    Nov 30, 2009
    Messages:
    700
    Location:
    Michigan (Gods country)
    On or off is really a personal preference thing. The question of changing the zero if you remove the barrel, if Both front and rear site, or both scope mounts depending on which you have, are mounted on the barrel, that should have no effect.
     
Thread Status:
Not open for further replies.

Share This Page