Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RSC Interior Re-model

Discussion in 'Shooting Gear and Storage' started by RBANNON, Nov 4, 2009.

Thread Status:
Not open for further replies.
  1. RBANNON

    RBANNON Member

    Joined:
    Aug 17, 2006
    Messages:
    41
    I would like to help a friend out who wants to re-arrange the inside of an older RSC. It looks pretty wild right now with the orange shag carpet over particle board. I was thinking about replacing the thick particle board partitions with some thinner plywood to gain a little more volume inside the RSC. He wants the carpet changed out because it has actually reacted with some of the recoil pads on his shotguns. I am attributing this to plasticizer leaching. Can anyone suggest a suitable material to line shelves and contact points or any other advice?

    Thanks,
     
  2. a1abdj

    a1abdj Member

    Joined:
    Jul 21, 2005
    Messages:
    2,012
    Location:
    St. Charles, MO (St. Louis)
    Sounds like your friend has a Browning.

    Most modern day gun safes are using a felt like material for the interior. It's the same fabric used to wrap speaker boxes for car audio applications, and is usually available at places that sell fabric.
     
Thread Status:
Not open for further replies.

Share This Page