Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ruger LC380 Review

Discussion in 'Handguns: Autoloaders' started by deadduck357, Mar 7, 2013.

Thread Status:
Not open for further replies.
  1. deadduck357

    deadduck357 Member

    Joined:
    Jan 13, 2010
    Messages:
    311
    Location:
    Tx
    Ruger sent me their LC380 for review. After a not so positive range session they sent a second pistol with admirable results. Still though the magazines won't hold more than a few Black Hills .380 rounds.
    [​IMG]

    For full review - Ruger LC380
     
  2. pacerdude

    pacerdude Member

    Joined:
    Apr 13, 2010
    Messages:
    220
    Location:
    Columbia, SC
    Very solid write up.
     
  3. Airbrush Artist

    Airbrush Artist member

    Joined:
    Jan 10, 2013
    Messages:
    333
    Location:
    Kettering,Ohio
    Awesome

    Best laid out review website I've seen Duck,I added the Ruger SRC9 to my List of Top 3 C&C Possibilties because of Your review ,Got it down to 4 #1.S&W M&P Shield 9mm--#2 Ruger LC9--#3 Ruger SR9c-- 4 Bersa 9mm or 40.. Thank You...
     
  4. deadduck357

    deadduck357 Member

    Joined:
    Jan 13, 2010
    Messages:
    311
    Location:
    Tx
    Thanks, stop by there from time to time, I'm usually working on something. The SR9c is my carry piece right now.
     
  5. MedWheeler

    MedWheeler Member

    Joined:
    Jun 14, 2008
    Messages:
    5,435
    Location:
    SouthEastern FL
    From the review:

    So, I have a question: if the only change to bring the caliber from 9x19mm to .380ACP is the magazine spacer, would slapping in a LC9 magazine "make this an LC9"? I'm guessing not, so what else is in place to prevent the inadvertent chambering of a 9mm Luger cartridge? I've not seen the gun in person yet, so I's assume a shorter chamber, right?
     
  6. psyopspec

    psyopspec Member

    Joined:
    Sep 28, 2004
    Messages:
    4,207
    Location:
    Cape Cod
    Correct. Physics would not allow a 9x19 to go into battery on a .380 chamber.
     
    Last edited: Mar 8, 2013
  7. snooperman

    snooperman Member

    Joined:
    May 4, 2009
    Messages:
    2,143
    Thanks for an excellent review. I bet this 380 will allow female shooters to easy rack the slide compared to "pocket" 380 pistols.
     
  8. deadduck357

    deadduck357 Member

    Joined:
    Jan 13, 2010
    Messages:
    311
    Location:
    Tx
    Correct, a shorter chamber. The longer 9mm(9x19mm) will not fully seat in a .380 ACP(9x17mm) chamber.
     
  9. deadduck357

    deadduck357 Member

    Joined:
    Jan 13, 2010
    Messages:
    311
    Location:
    Tx
    "Correct. Physics would NOT allow a 9x19 to go into battery on a .380 chamber."

    I'm sure you meant this but I thought for those that don't know it should be corrected.
     
  10. deadduck357

    deadduck357 Member

    Joined:
    Jan 13, 2010
    Messages:
    311
    Location:
    Tx
    They are using lighter recoil springs for the .380 cartridge vs the 9mm, so yes slide manipulation requires less force. And on top of that the felt recoil of the .380 was considerable less as well as less muzzle blast.
     
  11. psyopspec

    psyopspec Member

    Joined:
    Sep 28, 2004
    Messages:
    4,207
    Location:
    Cape Cod
    Ah, thank you, missed a very important word there. Correcting my post for safety purposes.
     
  12. Yankee John

    Yankee John Member

    Joined:
    Sep 4, 2005
    Messages:
    153
    Location:
    Minnesota USA
    Since the LC380 is basically an LC9, I assume that it has the same long trigger pull?

    I also wonder if I can simply change out the barrel/mag and convert my LC9 to fire the more commonly found (these days anyway) .380 ammo?

    I have installed the Galloway extra power recoil spring, so I would probably have to go back to the stock recoil spring...
     
  13. deadduck357

    deadduck357 Member

    Joined:
    Jan 13, 2010
    Messages:
    311
    Location:
    Tx
    Yes it does have the same trigger unit, but this 380 felt smoother than my LC9.

    I can't speak on behalf of the factory, but I can't see why it wouldn't work with replacing the barrel, magazine and springs. The .380 has lighter springs than the 9mm.
     
  14. deadduck357

    deadduck357 Member

    Joined:
    Jan 13, 2010
    Messages:
    311
    Location:
    Tx
    Unless... Some manufacturers that produce the "same" pistol in several calibers (such as 9mm, 40S&W, 357SIG) there is some slide weight differences between them. For instance, some steel may be milled out of a 40 S&W slide to make it lighter to properly function with the less recoil of a 9mm. In this case the LC380 and LC9 may be incompatible. Again, I can't speak for the factory.
     
Thread Status:
Not open for further replies.

Share This Page