Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

S&W Model 52 & reloading with V.V. N310

Discussion in 'Handloading and Reloading' started by Grimmy, Jan 4, 2009.

Thread Status:
Not open for further replies.
  1. Grimmy

    Grimmy Member

    Joined:
    Feb 28, 2008
    Messages:
    24
    Location:
    Lancaster, Ohio
    Has any one else besides me ever reloaded the .38 spec. wad cutter with N310 for Bullseye Target Shooting. I was told to use it the same way as Bullseye Powder. So I've been loading 2.7 gr. and it seems to work very well.
     
  2. bluetopper

    bluetopper Member

    Joined:
    Dec 17, 2005
    Messages:
    3,221
    Location:
    Northeast TX
    I switched from Bullseye to using 2.5gr of Clays powder. The shops around me don't have VV powders.
     
  3. AbitNutz

    AbitNutz Member

    Joined:
    Dec 28, 2008
    Messages:
    940
    I always have used 2.8 gr of Bullseye. I'd like to try Titegroup but I have a couple of pounds of Bullseye and at 2.8 grains a shot...I will run out about..never.

    I'm interested in trying Berry HBWC bullets...anyone try those in a 52-2?
     
  4. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    45,639
    Location:
    Alabama
    I have had excellent results with 700X, Clays and N310 in .38 target loads, including both the Ranier and the Berrys 148 Gr DEWC. I have not tried the Berrys 148 Gr HBWC yet. It's on the "to do" list.
     
Thread Status:
Not open for further replies.

Share This Page