Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Saiga trunnion question

Discussion in 'Rifle Country' started by Grim Peeper, Jun 6, 2011.

Thread Status:
Not open for further replies.
  1. Grim Peeper

    Grim Peeper Member

    Joined:
    Feb 10, 2010
    Messages:
    270
    Sorry for the poor pic quality. Does this look normal for the area that the bullet guide usually goes on a 7.62 x 39 saiga. I dont remeber seeing those ridges on both sides on the floor under the barrel front. From the pictures ive seen of bullet guide installations it looks more flat. Does the bullet guide go bewteen these ridges? Thanks
    [​IMG][/URL][/IMG]
    [​IMG]

    Uploaded with ImageShack.us
     
    Last edited: Jun 6, 2011
  2. Grim Peeper

    Grim Peeper Member

    Joined:
    Feb 10, 2010
    Messages:
    270
    Also I have not seen that little ramped part of the barrel on other saiga 7.62s
     
  3. Grim Peeper

    Grim Peeper Member

    Joined:
    Feb 10, 2010
    Messages:
    270
    Oh crap just realized I order the wrong bullet guide. Im at work and have restricted access to the internet i cant get on the danzig site to tell them to cancel the order does anyone have their number on hand.
     
  4. wally

    wally Member

    Joined:
    Jan 2, 2004
    Messages:
    12,361
    Location:
    Houston, Tx
    You can Email him at:

    dinzzag@yahoo.com

    I don't have a phone number.

    Your photo is really poor, its hard to tell what you are talking about, but it looks like a "flat" trunnion, I don't recall that "slot" on mine, perhaps they are trying to make it even easier to install the bullet guide after importation. I know early on they often didn't do the pistol grip nut cut out, but now they all seem to have it.

    I'd definitely talk to Dinzag as he may need to make a slightly taller bullet guide if they relieved the trunnion a bit.
     
Thread Status:
Not open for further replies.

Share This Page