Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scope for bushmaster AR15

Discussion in 'Shooting Gear and Storage' started by FullEffect1911, Oct 4, 2007.

Thread Status:
Not open for further replies.
  1. FullEffect1911

    FullEffect1911 Member

    Joined:
    May 15, 2005
    Messages:
    1,088
    Location:
    Northeast PA
    Hello,

    I'm looking to get a scope for my full size bushmaster (w/ carry handle) as I want to use it for some target shooting up to 200-250 yards. I know I could just use open sights, but i want a scope and i'm not terribly proficient with iron sights. I figure if i don't like it on the AR I could just mount the scope on a future rifle.

    I am looking hard at either the Leupold rifleman or Bushnell elite 2-7x. Is either one of these scopes better then the other? Even? Are there other better choices out there in the $200-250 or less price range?

    I would love to get a scope with target turrets for my AR-15 but I feel that may easily put me out of my price range. (I would still love to).

    any suggestions or insights would be appreciated.
     
  2. SpeedAKL

    SpeedAKL Member

    Joined:
    Mar 5, 2007
    Messages:
    1,027
    Location:
    McLean, VA
    I'm actually beginning the same process right now for my A3 Bushy, though I'm looking more down the mil-dot route.
     
  3. Slugless

    Slugless Member

    Joined:
    Jun 9, 2007
    Messages:
    722
    Location:
    Bayou City, TX
  4. tig56

    tig56 Member

    Joined:
    May 22, 2007
    Messages:
    15
    Location:
    Florida
    I've got a 16" Bushmaster Dissapator and have been working on several idea's for it. My first scope is a 6X35 rubber armored illuminated mil-dot, then I bought an ATN digital reflex scope, it's a sweet item when you need that type of targeting. Now I bought a Simmons White Tail 6.5 x 24 x 50 w/tru-plex reticle. I know there are a lot of high dollar scopes available but I was able to get this at a significant savings. It is a beautiful scope, well made and is very accurate. My short question to this long introduction is this. Where can I find a set of high turret's for E & W? I can find scopes and turret combinations all over but nobody is willing to part with just the turrets. Any idea's will be appreciated! Thank you!!
     
  5. DMK

    DMK Member

    Joined:
    Dec 24, 2002
    Messages:
    8,797
    Location:
    Over the hills and far, far away
    I've been very happy with the Weaver Classic scopes. I have a few on everything from AR15s, to K31s to FALs. I've found Natchez has great prices on them.

    [​IMG]

    [​IMG]
     
  6. cpttango30

    cpttango30 Member

    Joined:
    Aug 22, 2007
    Messages:
    791
    Location:
    Virginia
    I would go with the Bushnell elite 3200 before the Leupold Rifleman. The rifleman scopes I think are made in China.

    The Weaver, Bushnell, or nikon in the $200 to $300 range are going to get you more scope for the money. Do not forget Burris Either.
     
  7. FullEffect1911

    FullEffect1911 Member

    Joined:
    May 15, 2005
    Messages:
    1,088
    Location:
    Northeast PA
    i have recently noticed Burris scopes, in particular the fullfield II with ballistic plex. This is at the moment the scope i am going to go with. However I may change my mind when it comes time to actually purchase.
     
  8. Dirtypacman

    Dirtypacman Member

    Joined:
    May 30, 2007
    Messages:
    332
    Location:
    MA
    I went with a Nikon Prostaff 3-9x40 scope with low profile weaver rails on my bushy (w/ carry handle).

    $150 scope / $20 mounting hardware

    I sighted her in and she is working like a dream.
     
  9. tig56

    tig56 Member

    Joined:
    May 22, 2007
    Messages:
    15
    Location:
    Florida
    I purchased a set of Turret knobs from a US manufacturer, there aren't many available. I was pleased that I had finally found a decent set. The story falls apart when I tried to use them. They were so incompatible (?) with my scope that it took no time at all for them to break the knob tips right off the scope. It was repairable and I was able to get a full refund. I should've done my homework the first time around. I don't recommend aftermarket turrets!
     
  10. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    For 200 - 250 yard shooting, you certainly don't need target knobs to fiddle & diddle with!

    Until you get into the very high-dollar target/sniper glass, the adjustment clicks aren't that durable to be messing with them all the time.

    You should sight in a .223 at 200 yards to hit POA in the first place.

    At 100 yards it is going to be shooting about 1 1/2" high, and at 300 about 8" low.

    Those are pretty easy numbers to remember.
    Just learn the trajectory and hold over or under when not shooting at your 200 yard sight-in distance.

    rcmodel
     
  11. tig56

    tig56 Member

    Joined:
    May 22, 2007
    Messages:
    15
    Location:
    Florida
    Your response was right on the numbers! That's exactly what I did. I sight in at 25 yards, which puts me right on at 250 using 55 or 62 gr, high at 100 and a few inches low at 300. I'm still working on ability but it's getting better. I just wish I had a place behind the house where I could practice more often. It's a long way to the range and they're charging more than the ammo manufacturers! They need to give us poor boys' a break!! Thanks alot for your tip!

    Tig
     
  12. clemsonu0219

    clemsonu0219 Member

    Joined:
    Feb 8, 2008
    Messages:
    237
    You cant go wrong with a Nikon...
     
  13. no_problem

    no_problem Member

    Joined:
    Apr 22, 2006
    Messages:
    342
    DMK:

    Top looking hardware you got! Nice !:D

    Can you tell us about the scope mount you got on your AR?
     
  14. FullEffect1911

    FullEffect1911 Member

    Joined:
    May 15, 2005
    Messages:
    1,088
    Location:
    Northeast PA
    I believe he mention it is a weaver classic series. My guess specifically is a weaver classic v10. If that is it, it's 2-10x38. This is also the scope I ended up getting, and it is the nicest scope *I* have owned, worth probably more then the $200 or so price tag.
     
  15. Kingcreek

    Kingcreek Member

    Joined:
    Dec 24, 2002
    Messages:
    2,790
    Location:
    at the center of my own little universe
    DMK, Which mount is that on your AR?
    I've got a flat top AR (no carry handle) and a 3-9X Leupold. just looking for a good mount. don't plan on putting BUIS on this one.

    eta: I think I figured out its an Armalite mount.
     
    Last edited: Mar 14, 2008
Thread Status:
Not open for further replies.

Share This Page