Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scope mount for an Enfield

Discussion in 'Rifle Country' started by jeeptim, Dec 2, 2012.

Thread Status:
Not open for further replies.
  1. jeeptim

    jeeptim Member

    Joined:
    Mar 27, 2010
    Messages:
    575
    Location:
    California
    Hey Hi roaders
    Here's my story have an Enfield that was converted to a J/C by Santa Fe arms
    And I really like it but cant hit an outhouse from the inside. I try'ed all kinds of irons with not much luck. I have a few scopes kicking around and just need a mount of some sort any ideas?
     
  2. squarepants33889

    squarepants33889 Member

    Joined:
    Feb 7, 2012
    Messages:
    213
    Location:
    Saskatchewan, Canada
    I started thread a couple weeks ago called "1926 ShtLE Lee Enfield" The pictures are not spectacular, but you might be able to see the weaver style "bridge" that holds the scope. It requires drilling three holes in the receiver, but it seems solid.
    It can't be too hard. I suspect the owner previous to me did it himself. With the bridge installed, it is as simple as mounting any other scope.[​IMG][/IMG]
     
  3. squarepants33889

    squarepants33889 Member

    Joined:
    Feb 7, 2012
    Messages:
    213
    Location:
    Saskatchewan, Canada
    photo3.jpg another angle
     
  4. 351 WINCHESTER

    351 WINCHESTER Member

    Joined:
    Mar 19, 2007
    Messages:
    4,083
    S & K makes no drill rock solid mounts for the lee enfields. You may have a no. 4 or a no. 3. They use standard weaver rings. These are steel mounts.
     
  5. gunnutery

    gunnutery Member

    Joined:
    Jul 30, 2009
    Messages:
    1,682
    Location:
    Iowa
  6. 303tom

    303tom member

    Joined:
    Jul 16, 2011
    Messages:
    4,059
    Location:
    Missouri
    Picture`s................
     
  7. brow_tines

    brow_tines Member

    Joined:
    Feb 14, 2011
    Messages:
    72
    Location:
    Kentucky
    I think I might have a B-Square mount that came off a Lee Enfield that attaches to part of the rear sight that requires no drilling.
     
  8. jeeptim

    jeeptim Member

    Joined:
    Mar 27, 2010
    Messages:
    575
    Location:
    California
    Good stuff nice pix I mentioned the J/C I also have a sporterized 1 mk 3 with the ever hard to find #3 bolt head so going to scope the J/C found a scope mount on G/B I know but where else can I find one before i order someone mentioned they may have an extra.
    Again thanx for all the info.
     
  9. madcratebuilder

    madcratebuilder Member

    Joined:
    Jul 15, 2007
    Messages:
    5,020
    Location:
    Northern Orygun
    Check evil bay for the S&K scope mount, you may save a few bucks. The No4 and No1 rifles uses different mounts.

    The old Weaver steel tube K2.5 make the No4 look much like the No4(T) sniper rifle.

    No4 with K2.5
    K25faz2.jpg

    No4(T)
    finished01.jpg
     
Thread Status:
Not open for further replies.

Share This Page