Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Scope mounting on AR?

Discussion in 'Rifle Country' started by Grassman, Jan 1, 2010.

Thread Status:
Not open for further replies.
  1. Grassman

    Grassman Member

    Joined:
    Nov 25, 2008
    Messages:
    1,778
    Location:
    Texas
    What's the proper scope position on an AR? Should the eyepiece be behind the charging handle? I've noticed that it's a little cumbersome pulling the handle back when the scope eyepiece is above it or a little behind it. Or is it more a personal preference type thing? I've scrolled through a few AR pic threads and you see them mounted all different ways. Behind , even and in front of the charge handle. Any help? Here is a pic of how I have it currently mounted, is it too far back?
     

    Attached Files:

    • ar4.jpg
      ar4.jpg
      File size:
      27.9 KB
      Views:
      17
  2. highorder

    highorder Member

    Joined:
    Oct 7, 2007
    Messages:
    4,349
    Location:
    Cincinnati
    People that shoot "nose to charging handle" mount scopes further forward.

    Take a look at my Millett DMS-1.
     
    Last edited: Jan 13, 2013
  3. EyebrowZing

    EyebrowZing Member

    Joined:
    Jan 9, 2007
    Messages:
    41
    Location:
    MCAS Beaufort
    I personally would place it forward of the charging handle. When shooting prone with irons I find my nose rests on the charging handle. When we received the RCO's for our A4's we were simply told to mount it wherever we could get a comfortable eye-relief.
    I would say a few inches forward and back make no impact on your accuracy compared to the importance of you maintaining a consistent cheek weld and positioning. If it extends past the charging handle, oh well, it's not like it's used that often.
    If it is, I suggest using a technique used with immediate action to rectify jams with the weapon still in the shoulder. Rather than hooking a finger on either side of the handle, curl the left hand into a loose fist and allow the knuckle of your index finger to catch on the handle release, and pull fully to the rear keeping the hand on the left side of the weapon the entire time. It takes some muscle control and practice, but in the long run I find it much simpler and faster than the normal two fingered grip.
     
  4. JDGray

    JDGray Member

    Joined:
    Sep 16, 2005
    Messages:
    5,131
    Location:
    SW MI.
    Depends on your scopes eye relief, and your natural shooting position. The nose to the charge handle shooting position would require an offset scope base, putting the scope way forward of the handle. Use what works for you:)
     
  5. Grassman

    Grassman Member

    Joined:
    Nov 25, 2008
    Messages:
    1,778
    Location:
    Texas
    I just got this Leupold scope yesterday, so I have not tested it out yet, it seems way too far back. For my first sighting I think I'm gonna put it forward of the charging handle.
     
  6. highorder

    highorder Member

    Joined:
    Oct 7, 2007
    Messages:
    4,349
    Location:
    Cincinnati
  7. Grassman

    Grassman Member

    Joined:
    Nov 25, 2008
    Messages:
    1,778
    Location:
    Texas
    Yes I have found that out.
     
  8. wishin

    wishin Member

    Joined:
    Nov 20, 2009
    Messages:
    2,430
    Location:
    Georgia
    I moved mine forward with a rail extender from Brownells.
     
  9. highorder

    highorder Member

    Joined:
    Oct 7, 2007
    Messages:
    4,349
    Location:
    Cincinnati
    I use the YHM extended rail pictured. It works well with some simple 30mm rings.

    [​IMG]
     
  10. taliv

    taliv Moderator

    Joined:
    Oct 23, 2004
    Messages:
    22,098
    grassman, it looks way too far back and way too high. unless you're a horse, i don't think you're going to get a decent cheek weld like that.

    if you loosen the rings and just push the scope forward til it stops then back up just a hair, it would probably be decent in terms of eye relief, but still too high.

    when you're mounting your scope you need to take into account several things:
    1. a way to consistently put your eye in the same spot every time (e.g. nose to CH)
    2. the eye relief at minimum magnification
    3. the eye relief at maximum magnification
    4. make sure you haven't done anything to impede operation of the charging handle
    5. leave room for BUIS
    etc
     
Thread Status:
Not open for further replies.

Share This Page