Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Short Barrel Suomi

Discussion in 'NFA Firearms and Accessories' started by macadore, Oct 27, 2010.

Thread Status:
Not open for further replies.
  1. macadore

    macadore Member

    Joined:
    Jun 21, 2007
    Messages:
    926
    Location:
    San Antonio
    Last edited: Oct 27, 2010
  2. WardenWolf

    WardenWolf member

    Joined:
    Nov 11, 2008
    Messages:
    5,884
    Location:
    Northern Virginia
    Yup, that's how it works. Once you receive your permit to build an SBR, you can build it at any point after that.
     
  3. rfurtkamp

    rfurtkamp Member

    Joined:
    Dec 10, 2005
    Messages:
    718
    Location:
    SE Idaho
    Assuming the parts fit - and don't assume that on a semi conversion.
     
  4. WardenWolf

    WardenWolf member

    Joined:
    Nov 11, 2008
    Messages:
    5,884
    Location:
    Northern Virginia
    For the record, that gun is a LOT bigger than it looks just from pictures. I was at J&G Sales last weekend and they had one on the wall. Seeing it immediately ended my wants of owning one. It's huge. You look at it in pictures and expect it to be some little compact thing. Oh no. It's a full size rifle stock with a big, heavy-looking action on top of it.

    By the way, everyone says the drum doesn't work properly with it. The stick mags work fine, but the drum doesn't. Atlantic Firearms also wants WAY too much for it. They're $400 over at J&G (http://www.jgsales.com). Anyone who pays Atlantic Firearms' more than 50% markup is crazy.
     
  5. PTK

    PTK Member

    Joined:
    Mar 25, 2007
    Messages:
    3,712
    Location:
    Montana
    The semi-auto Kp31 conversions are specifically modified in such a way to prevent a short barrel from seating without modification, so that the BATFE wouldn't find them easily convertible. :(
     
  6. Sam Cade

    Sam Cade Member

    Joined:
    Sep 9, 2005
    Messages:
    5,228
    Location:
    Rural Kentucky, surrounded by Amish
    Well, that pretty much kills the "want" factor for me.
     
  7. WardenWolf

    WardenWolf member

    Joined:
    Nov 11, 2008
    Messages:
    5,884
    Location:
    Northern Virginia
    For someone wanting a cheap 9mm SMG-style carbine, they're a good choice. They're very reliable with the 36-round stick mags. They thus put a lot of firepower in your hands at short range. They'd probably be very good for home defense. However, they're just too beastly for my tastes.
     
  8. macadore

    macadore Member

    Joined:
    Jun 21, 2007
    Messages:
    926
    Location:
    San Antonio
    Thanks. I thought it was a small rifle. It looks like converting a Draco would be a better way to go.
     
  9. macadore

    macadore Member

    Joined:
    Jun 21, 2007
    Messages:
    926
    Location:
    San Antonio
    That pretty much kills the idea as well.
     
  10. WardenWolf

    WardenWolf member

    Joined:
    Nov 11, 2008
    Messages:
    5,884
    Location:
    Northern Virginia
    Good call. I actually handled a Draco while I was up there. Nice little guns. Very lightweight. I may get one for myself in a few months. Everyone says they run great. You can't one-hand them like you can a PLR-16 (pistol AR-15) but they're cheap and already set up for a muzzle brake. If you're going to build an SBR, though, they'd make a fine platform for the reasons already mentioned. Even better is that the Draco takes a standard AK handguard, so you have a world of options for customizing it. These guns are just begging to be SBR'd.
     
    Last edited: Oct 28, 2010
  11. Ingsoc75

    Ingsoc75 Member

    Joined:
    Apr 15, 2009
    Messages:
    175
    Location:
    Rocket City, AL
    I would like to get a registered SBR AK74u but they are too expensive.

    Is it possible to take an existing AK74 and after doing the SBR process get it converted into an AK74u? Would that end up being just as expensive as having a gunsmith do that for me from a parts kit?
     
  12. Sam1911

    Sam1911 Moderator

    Joined:
    Oct 22, 2007
    Messages:
    33,677
    Location:
    Central PA
    If you started with an AKS-74 (triangle side-folder) you could get close by having him shorten the barrel and the gas system, relocate the front sight block, and come up with an adapter to let you remount the flash hider/comp, though gunsmith time is not terribly cheap. The problem lies in that the AKS-74U has some unique parts so getting it right wouldn't be as simple as cutting the -74 down.

    The rear sight block and top cover are very different as are the sights, barrel, gas piston, handguards, and flash hider.

    Almost certainly you'd have a better product by starting with the right parts kit to begin with. A good friend of mine has an SBR AKS-74U that is immaculate. Having shot it quite a bit, it is worth doing it right if that's what you want.
     
  13. Ingsoc75

    Ingsoc75 Member

    Joined:
    Apr 15, 2009
    Messages:
    175
    Location:
    Rocket City, AL
    Oh I forgot about the triangle side folder receiver. My 74 doesn't have that and I'm sure the rear mounted side folders that I've seen on Kvar would look lame on a SBR version.
     
Thread Status:
Not open for further replies.

Share This Page