Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sierra's 190 & 200 MK in 300 mag

Discussion in 'Handloading and Reloading' started by TargetShooter2, Dec 25, 2002.

Thread Status:
Not open for further replies.
  1. TargetShooter2

    TargetShooter2 Member

    Joined:
    Dec 24, 2002
    Messages:
    62
    Location:
    Missouri
    Hello,
    Has anyone have any data on the 190s or 200 Sierra Match HPBT in the 300 mag . my Sako has a 1-11 twist but iam looking for a load that will take me out to 1K .

    Thanks to all that reply

    TS2
     
  2. EchoSixMike

    EchoSixMike Member

    Joined:
    Dec 24, 2002
    Messages:
    140
    Location:
    IL
    190SMK's and the 300WM? I use 72.0gns of N-160 in a Winchester case with Fed215M primers. I seat the bullets to .020 off the leade(which is 3.500 OAL on my Winchester M-70) This powder is pretty fast, you could probably move to RL22 or 25 or H1000 and get more velocity. But I'm getting 3040fps froma 26" barrel and it groups into 3/4", so I'm happy. I've shot in the middle 190's at 1K with this load, so it'll do if you will. Those bullets are moly'd BTW. Standard caveats apply. If you're stupid and blow yourself up, don't cry to me. I do not have any money, so don't bother with the lawsuits;) S/F...Ken M
     
  3. Surely

    Surely Member

    Joined:
    Jan 23, 2004
    Messages:
    79
    Bump

    Oldest thread bump!
     
Thread Status:
Not open for further replies.

Share This Page