Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sig P228 better trigger than P220?

Discussion in 'Handguns: Autoloaders' started by agdodge4x4, Nov 18, 2012.

Thread Status:
Not open for further replies.
  1. Lonestar49

    Lonestar49 Member

    Joined:
    Feb 17, 2007
    Messages:
    2,654
    Location:
    So. Calif.
    Good new, good old

    ...

    Yep, part of that, good, secret sauce was when they converted from the long 2" mainsprings to the much shorter 1" mainsprings with elevated, plastic, bases making for less spring tension build-up during DA pulls and far less "felt" possible mainspring grind along the hammer strut during the DA compression cycle.

    Some of the_new works are proving out to be a better, more forgiving, design-change-improvement with the DA pulls out of the box and, lasting, up a long road of use.. IMHO

    ommv,


    Ls
     
    Last edited: Nov 20, 2012
  2. agdodge4x4

    agdodge4x4 Member

    Joined:
    Aug 28, 2011
    Messages:
    31
    What are you guys suggestions for a good grease for my pistols? I have some 'copper' grease I used on my Glocks, but its messy. Any other suggestions?
     
  3. chris in va

    chris in va Member

    Joined:
    Mar 4, 2005
    Messages:
    6,097
    Location:
    Louisville KY
    I use synthetic motor oil on all my handguns. No issues.
     
  4. 9mmepiphany

    9mmepiphany Moderator

    Joined:
    Dec 27, 2002
    Messages:
    18,822
    Location:
    northern california
    The usual Professional recommendation is Slide Glide or Lubriplate...I've even heard folks who use Mobile 1 axle/bearing grease.

    What you want is a persistent grease that stays where you put it during your range session
     
  5. MCMXI

    MCMXI Member

    Joined:
    Jul 1, 2008
    Messages:
    7,384
    Location:
    NW Montana
    I can confirm this because I took the original picture shown by Lonestar49!! A couple of years ago I called up the folks at Grayguns and asked if they had any of the older standard triggers because I didn't like the short triggers that shipped with my P220 Combat and Carry. I swapped out both triggers and gave the short triggers away to a member on the SIG forum who preferred the short trigger. I like the Short Reset Trigger (SRT) in my P239.
     
Thread Status:
Not open for further replies.

Share This Page