Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sig Part????

Discussion in 'Gunsmithing and Repairs' started by bkundingerii, Feb 2, 2012.

Thread Status:
Not open for further replies.
  1. bkundingerii

    bkundingerii Member

    Joined:
    Jan 11, 2012
    Messages:
    46
    Asking for help on identifying this spring. This is out of a Sig 220ST. Somehow it has been distorted and isn't on any of the Sig schematics. Can any of you out there identify this and suggest where I might be able to pick one up? I would appreciate it.

    Here are some pics
     

    Attached Files:

  2. Blue68f100

    Blue68f100 Member

    Joined:
    May 25, 2011
    Messages:
    3,420
    Location:
    Piney Woods of East Texas
    Your 220 has the mag disconnect. So the spring may be related with it. I have not worked on any Sig with that system. And probably never will because I don't like mag disc, even though Sig's design does not impact the trigger.

    There was a post about the mag disconnect on the Sigforum a while back.
     
  3. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    I though the other part in photo #2 looked like the slide stop with the slide release thumb piece broken off?

    rc
     
  4. bkundingerii

    bkundingerii Member

    Joined:
    Jan 11, 2012
    Messages:
    46
    Yeah, Sig said the it's the spring for the mag safety system. Basically, the hammer won't fall if there isn't a mag in. I'm waiting to hear from sig what the spring is. Kind I odd, my other sigs don't have this set up. Thanks for the replies. Now I just need to find this spring somewhere, or disable it.
     
  5. Blue68f100

    Blue68f100 Member

    Joined:
    May 25, 2011
    Messages:
    3,420
    Location:
    Piney Woods of East Texas
    TopGun Supply normally has a good selection of Sig Parts. They ship out normally in 24hr or less.
     
  6. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Why didn't you just get one from SIG while you were talking to them??

    rc
     
  7. bkundingerii

    bkundingerii Member

    Joined:
    Jan 11, 2012
    Messages:
    46
    RCmodel, they had to look into the part and couldn't give me a part number or price. The guy was supposed to get back with but didn't. I modified another spring this morning and fixed it. Thanks.
     
Thread Status:
Not open for further replies.

Share This Page