Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sig Sauer 556 Range Report *PICS*

Discussion in 'Rifle Country' started by MedicMan218, Apr 10, 2010.

Thread Status:
Not open for further replies.
  1. MedicMan218

    MedicMan218 Member

    Joined:
    Apr 4, 2010
    Messages:
    11
    Went out today to break in my new Sig 556 with Sun Optics USA zero power sight, kinda looks like an ACOG but deffinitly isn't! ;-)
    All shots were at 50 yards with Monarch 55gr steel cased .223. Only one failure to fire out of 280 rounds. The striker hit the round but no combustion. I'm gonna blame the ammo, not the rifle.

    [​IMG]
    After many, many, many, many, many adjustments I decided this was as close as I was going to get to a true zero.


    [​IMG]
    This was my second target after the zeroing in process. 30 rounds all inside the square!
    Pretty good grouping except for those two little wanderers there on the bottom right.


    [​IMG]
    Third fresh target after zero. I was having trouble hitting the smaller squares in the corners because at the 50 yard mark the reticle completely occluded the target making it next to impossible to visualize. Then, out of nowhere I got the idea to reduce the intensity(power/brightness) of the reticle so I could kind of see thought it and still be able to put it on target. I couldn't believe it took me so long to figure that out....it seriously was like a light bulb moment, I felt kind of silly about not thinking of it sooner.
    After that minor adjustment I wore out that top right!!!!
    30 rounds in each square.



    All in all I'd have to say that I am extremely pleased with the days events and the accuracy of my current set up. hopefully it will be just as accurate at 100 yards once I get either a powered scope or a magnafier for my current sight.
    ohhhhh the possibilities
     
  2. Carter

    Carter Member

    Joined:
    Mar 25, 2010
    Messages:
    1,434
    Location:
    North Carolina
    how'd the sig's thin barrel do?
     
  3. Mags

    Mags Member

    Joined:
    Apr 8, 2009
    Messages:
    3,235
    Location:
    Belgium
    Nice range report. Have any pics of the rifle?
     
  4. MedicMan218

    MedicMan218 Member

    Joined:
    Apr 4, 2010
    Messages:
    11
    Carter-I didnt notice it too much. Then again the only reference I have to compair it to is the Army issue M-16 I havent shot in over 6 yrs.
    I suppose it did well by the looks of the targets.

    The Real Mags-Stand by, I'll get you a pic here in a sec.
     
  5. MedicMan218

    MedicMan218 Member

    Joined:
    Apr 4, 2010
    Messages:
    11
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    Quad Rail, stock on this unit.
    [​IMG]
    Sun Optics USA zero power sight. $90.00 at last gun show, pretty decent for the price in my opinion.
    Also, the factory rotary Diopter iron sight.
    [​IMG]
    The reticle of the Sun Optics sight
     
  6. Evil Monkey

    Evil Monkey member

    Joined:
    Jun 26, 2006
    Messages:
    1,486
    Is it me or does that SIG556 have a very short gas system??
     
  7. Tommygunn

    Tommygunn Member

    Joined:
    Jun 14, 2006
    Messages:
    4,508
    Location:
    Morgan County, Alabama
    Looks like the Patrol SWAT model, which does have a short piston system compared to the Classic or standard 556.
    I have the Patrol version myself. A little less nose-heavy and a tad easier to maneuver with.
    Yes, the short system produces a little faster wear, but it will still last a long time.
     
  8. Zerodefect

    Zerodefect Member

    Joined:
    Mar 28, 2009
    Messages:
    4,381
    Location:
    Yakutsk, Sakha Republic
    Isn't the gas block adjustable anyway?
     
  9. DFW1911

    DFW1911 Member

    Joined:
    Sep 21, 2006
    Messages:
    1,231
    Location:
    Hill Country, TX
    It is. Look at the pics. At the end of the forearm there is a stainless notched piece with a hole in it. That's the piece you turn to adjust pressures.

    According to the manual (yep, I actually read it :)), if your rifle fouls or you start experiencing any malfunctions you turn the knob to increase pressure which is supposed to take care of any gas system issues. Okay, I'm paraphrasing, but you get the idea :D!

    I've never had to turn mine since my 556 hasn't had any issues whatsoever...except an uncanny ability to eat a lot of ammunition!
     
  10. Hatterasguy

    Hatterasguy Member

    Joined:
    Jan 4, 2010
    Messages:
    1,604
    Nice shooting! I love my Sig I just put 300 rounds through it today.
     
Thread Status:
Not open for further replies.

Share This Page