Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sig226 vs Beretta 92FS?

Discussion in 'Handguns: Autoloaders' started by DoomGoober, May 15, 2011.

Thread Status:
Not open for further replies.
  1. DoomGoober

    DoomGoober Member

    Joined:
    Oct 14, 2010
    Messages:
    82
    After much research, I bought a Sig P226. I like it but the other day I picked up a friend's Beretta 92FS and boy, that thing points beautifully, my groups were amazing (even using his Straight Eight sights, which screwed with my vertical aim a bit.) The trigger definitely isn't as smooth as the 226, especially double action, but it's not particularly worse -- just different.

    The only thing I didn't like was the safety on the slide, which I kept activating as I racked.

    So my question is, why do so many people dislike the 92FS? Am I missing something that will reveal itself only after many hours of use? Why did the internet consensus so heavily favor the P226?

    Thanks in advance!
     
  2. Milkmaster

    Milkmaster Member

    Joined:
    Dec 29, 2006
    Messages:
    2,028
    Location:
    Murfreesboro, TN
    No complaints about my 92FS. It eats anything I decide to shoot through it without complaint, is as accurate as I can be, and disassembles for cleaning easily. What is not to like? The only valid complaint I do here is from those with smaller hands. The 92FS is a full size pistol. Some with smaller hands may not like it for good reason.
     
  3. john5036

    john5036 Member

    Joined:
    Feb 4, 2011
    Messages:
    326
    Location:
    Dallas
    If you are reactivating the safety every time you rack the slide, you are doing it wrong :) Load the magazine, do the DA dance, fire till slide lock, reload, hit slide release, repeat. No need to rack, the slide release is quite pronounced vs. a Glock, which requires a bit more focus.

    However, it's that safety/decock lever that's the reason many people dislike it. It really is a functionally worthless manual safety in defense situations. People forget that it is a battle/war pistol primarily, with personal defense quite the afterthought.
     
  4. FIVETWOSEVEN

    FIVETWOSEVEN Member

    Joined:
    Aug 28, 2009
    Messages:
    5,076
    The complaints mostly come from those in military service because the military picked such a reliable handgun, and stuck crappy aftermarket magazines which is the cause for all the faults.
     
  5. Gun Fever

    Gun Fever Member

    Joined:
    Apr 17, 2011
    Messages:
    24
    Location:
    rockland new york
    My m9 is a fine piece of machinery never had a problem, and i think it's much better looking than most full size pistols
     
  6. labhound

    labhound Member

    Joined:
    Feb 8, 2010
    Messages:
    574
    Love my Beretta 92FS and my Stoeger 8000 and 8045, all with the slide mounted safety/decocker. As a matter of fact, I prefer it over a frame mounted safety.
     
  7. Rustinthewheel

    Rustinthewheel Member

    Joined:
    Jan 9, 2011
    Messages:
    32
    Location:
    Norfolk,VA
    A lot of disdain for the M9/ 92 series comes from the military, from what I have seen the sidearms are not always well taken care of, or get worn. This coupled with the not always wonderful quality of military ammo leads some people to lose faith in the Beretta design.


    They are both beautiful firearms, and will give plenty of faithful service.
     
  8. cslinger

    cslinger Member

    Joined:
    Dec 24, 2002
    Messages:
    4,482
    Location:
    Nashville, TN
    IMO the SIG is the better handgun design.................that being said by better I mean like the Ford F150 is better then the Silverado.

    Basically both are very good. The SIG is a bit more durable in my opinion.
     
  9. DoomGoober

    DoomGoober Member

    Joined:
    Oct 14, 2010
    Messages:
    82
    Thank you for all of your replies. I do notice that it's mainly former military who dislike the 92FS.

    Can anyone explain why the most common variant has a safety? Is this a military requirement or is it so you can carry condition one?

    Thanks again!
     
  10. EAJ

    EAJ Member

    Joined:
    Apr 22, 2008
    Messages:
    485
    Decisions, decisions; a remedy for the indecisive… ;)

    [​IMG]

    [​IMG]
     
  11. Nushif

    Nushif Member

    Joined:
    Mar 21, 2010
    Messages:
    3,082
    Location:
    Corvallis, OR
    I think because most people get exposed to worn out and shot out military models that are stored in armories for years on end.

    My 92D had been perfect pretty much, aside from being honkin' HUGE if I ever wanted to conceal it. Why does it have a safety? I dunno, tbh because the design doesn't *need* one ... so it kinda reeks of a requirement.
     
  12. Quentin

    Quentin Member

    Joined:
    Jul 30, 2005
    Messages:
    1,826
    Location:
    NorthWest USA
    I'm not a fan of the Beretta 92FS. A little too big for my hands and awkward. Shot just fine but seems like for such a large gun it should be a .40 S&W or .45ACP. I've fired a lot of 9mms and think there are better choices. Of the 9mils I've fired I have to give the nod to the Hi-Power. I have not fired the Sig 226 but it feels good in the hand.
     
  13. DblEGT

    DblEGT Member

    Joined:
    Mar 19, 2011
    Messages:
    2
    I loved the 92FS so much, I went out recently and purchased the updated version, the Beretta 92A1..... A VERY SWEET GUN !!! Just look at the construction, quality, design, etc ... WOW.

    (by the way, I tried the SIG 226 and came away unimpressed)
     
  14. MJ_ATL

    MJ_ATL Member

    Joined:
    May 16, 2011
    Messages:
    112
    Location:
    Atlanta, GA
    I miss my Beretta 92FS, it was one of the best shooting most accurate pistols I've owned. One of these days Dad will give it back to me and it can sit next to my Sig Sauer P226s and they can all compete for favorite gun status.
     
  15. Smaug

    Smaug Member

    Joined:
    Apr 18, 2004
    Messages:
    852
    Location:
    North suburban Chicagoland
    Versus? Well, you probably don't to hear this, since you bought the P226, but I think the Beretta is a supermodel compared to any Sig Sauer.

    You make a fair point about the DA trigger though.

    I'd take the Beretta in a heartbeat.

    As for activating the safety accidentally, you'd get used to that if you owned it. Nice long barrel and sight radius.
     
  16. 1KPerDay

    1KPerDay Member

    Joined:
    Jan 19, 2006
    Messages:
    12,995
    Location:
    Happy Valley, UT
    I have both and like both. The ONLY thing I dislike about the beretta is the location and function of the decocker/safety. It's in the way and (for me) can be activated during malfunction clearances. Other than that it's a peach.

    I'd take the SIG if I could only have one, though.
     
  17. funnelcake

    funnelcake Member

    Joined:
    Oct 27, 2007
    Messages:
    272
    Once shot both side by side. The Beretta felt way better, shot better, and was more accurate. Same opinion & better accuracy was expressed/ achieved by the two shooting companions along for the day. Obviously small sample pool though. Most distinct memory is the Sig felt like a cheap toy while handling and shooting. I know better and both are alloy frame pistols, so I expected them to be somewhat similar. Definitely surprised me. 92 is on the list if a double-stack nine ever ranks high enough on the want list.

    Funnel
     
  18. md7

    md7 Member

    Joined:
    Aug 18, 2006
    Messages:
    977
    Both pistols have their advocates and detractors. In the end, they are both well made and reliable pistols that should serve you well, so the deciding factor should really boil down to personal preference.
     
  19. Onmilo

    Onmilo Member

    Joined:
    Jul 26, 2004
    Messages:
    9,773
    Location:
    Illinois`
    I own a Sig 226 and I own a Beretta M9 and like them both.
    I understand why they ended up so equal in the U.S. service pistol trials!

    P.S. the 92FS/M9 was designed to go "on safe/decocked" when the slide is cycled.
    With training and familiarization, one gets in the habit of holding the safety levers high for first shot single action or snicking the safety to the up/off position for ready to fire trigger cocking first shot if so inclined.

    The 226 can be cycled and left cocked because it has a firing pin lock that will not allow the firing pin to go forward unless the trigger is pulled fully to the rear, or it can be decocked for a first round triggger cocking action using the decocking lever.

    The only complaint I have between the two guns is with the Sig which I find the slide release to be located to far to the rear which causes me to hit the decocking lever instead of the slide release during speed reloads, very annoying.
     
  20. 1KPerDay

    1KPerDay Member

    Joined:
    Jan 19, 2006
    Messages:
    12,995
    Location:
    Happy Valley, UT
    Really....:scrutiny:
     
  21. SwampWolf

    SwampWolf Member

    Joined:
    Sep 18, 2005
    Messages:
    4,003
    Location:
    North Central Ohio
    Same thing happens to me with the Model 92 and it's not uncommon for any slide mounted safety/decocker to be inadvertently activated during malfunction clearance drills. I'm a big fan of Smith & Wesson third generation pistols but the same thing can happen to them (the traditional da variants). You just have to be mindful of the possibility and be able to react accordingly.

    On the plus side, the aforementioned Berettas and Smiths are so darned reliable that malfunctions are a very rare occurrence indeed.
     
  22. W.E.G.

    W.E.G. Member

    Joined:
    Sep 26, 2006
    Messages:
    7,395
    Location:
    all over Virginia
    I traded my Beretta 92 even-steven for this.

    SmithandWessonmodel34-1leftside.jpg

    I have several crunchentickers - although none of them a SIG.

    I don't think I'm going to find a 9mm I like as a CARRY GUN better than the Glock 17.
    kool_aidGlock.jpg
     
  23. FIVETWOSEVEN

    FIVETWOSEVEN Member

    Joined:
    Aug 28, 2009
    Messages:
    5,076
    They both have firing pin blocks and both are designed to be carried hammer down only. The Beretta has a safety and that is usually left off for carry as it was designed.

    The complaint you have with the SIG is just because you aren't used to using it as much.
     
  24. Paul7

    Paul7 Member

    Joined:
    Apr 3, 2008
    Messages:
    952
    Location:
    New Mexico
    I've got a new 92FS that had numerous failures the first 150 rounds, hopefully I can get it straigtened out. Never had so much as a hiccup on my Sigs.
     
  25. Jed Carter

    Jed Carter Member

    Joined:
    Oct 19, 2008
    Messages:
    1,410
    Location:
    LEXINGTON, KY
    I have both the Beretta 92FS and a SIG P226, the Beretta for the most part is a safe queen, SIG makes many range trips and has done night stand duty for many years. Beretta is a fine pistol, I just do not like the slide mounted safety / decocker, it is hard to reach, flips the wrong direction (at least for me). SIG's trigger is smoother in SA and the SIG has Tritium night sights. SIG sure is ugly, Beretta is a real nice looking pistol, but I would choose a P226 over the 92FS. The SIG is worth the higher price tag in my experience, but other than the safety lever on the Beretta I have nothing but good experiences with it... just better with the P226.
     
Thread Status:
Not open for further replies.

Share This Page