Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Simple & Effective Semi Auto

Discussion in 'Handguns: Autoloaders' started by entrepreneur1969, Nov 19, 2006.

Thread Status:
Not open for further replies.
  1. entrepreneur1969

    entrepreneur1969 Member

    Joined:
    Nov 10, 2005
    Messages:
    2
    Location:
    Oklahoma
    I have been a S&W Revolver fan for several years and carry one daily. I also have bought and tried some semi-autos over the years and never really liked any of them. Question; does someone make, or used to make, a semi-auto with just one safety, that a person can take apart, clean and re-assemble without the assortment of punches, needle nose pliers, etc required to put together most of the ones made today. I do pretty well on most stuff as a hobby gunsmith, but there should be a better way to build a pistol. (without all the lawyer interfernce) A 1911 style without the grip safety might be OK. Anybody got any referrals for me. I would appreciate it.
    P.S I am new to this site but have been around and worked on guns for over 2 decades now.
     
  2. browningguy

    browningguy Member

    Joined:
    Jul 21, 2004
    Messages:
    4,524
    Location:
    Houston, TX
    Uhmmmmm, how about a Browning High Power to start? One safety, lock the slide back and push out the slide release (with a finger, no punches required), relaease slide lock, pull slide off the front.

    And there are abunch of others just as simple. EAA Witness series, CZ75, on so on.
     
  3. velojym

    velojym Member

    Joined:
    Apr 9, 2006
    Messages:
    617
    My ol' Ruger P95 is extremely simple to take down without tools, and it's as simple as a DA revolver to operate. Of course, there are still clearing drills and whatnot, but the operation itself is about as close as I've found.
     
  4. entrepreneur1969

    entrepreneur1969 Member

    Joined:
    Nov 10, 2005
    Messages:
    2
    Location:
    Oklahoma
    Simple and Effective

    I did own a real Browning Hi-power once. Very well built piece of equipment. The only problem was/is my hands are large enough that the slide made 2 little marks on the web of my right hand if I wasn't real careful about my grip. Also owned a EAA Witness in 40S&W. I love the caliber, but the gun would start to jam after shooting 75 rounds or so in IDPA match. I got pretty good at clearing jams on the clock. I have not owned a CZ 75 and am considering it. I just recently sold a Glock 22 (40S&W). It shot everything I put thru it. I just prefer metal over plastic. I have owned a Beretta 96, Taurus PT-92 and those are a real bear to take all the way down to the bare frame and reassemble. :cuss: I did own a CZ 52 for a while. Very good shooter but a little tricky to totally disassemble and tune up. I am getting picky in my old age. lol.
     
  5. 10-Ring

    10-Ring Member

    Joined:
    Dec 24, 2002
    Messages:
    12,037
    Location:
    California
    Let me be the first to say "Get a Glock!" as I understand it, only 33 pieces & no tools required ;)

    Where are my manners??? Welcome to THR :D
     
  6. Skywarp

    Skywarp member

    Joined:
    Sep 20, 2006
    Messages:
    305
    Location:
    Nor*Cal 707
    Eek. just one safety and no grip safety.Beretta?


    Ohh if you count your brain as a safety then a GLOCK.


    Can't get any simplier or more efficient than that.
     
  7. dm1333

    dm1333 Member

    Joined:
    Dec 21, 2005
    Messages:
    971
    another vote for a glock

    Everyone gets all fired up that the Glock has no "safety" but it is the same concept as a revolver. And if you don't like the lighter trigger pull you can make it heavier, more like a revolver DA trigger.
     
  8. High Planes Drifter

    High Planes Drifter Member

    Joined:
    Feb 21, 2006
    Messages:
    1,204
    If you classify the trigger as a safety (hey, you said you were a revolver guy:) ), that opens things up to semis with decocker only. Sigs are great guns; so are Ruger P-series DK.
     
  9. Sylvilagus Aquaticus

    Sylvilagus Aquaticus Member

    Joined:
    Dec 24, 2002
    Messages:
    2,170
    Location:
    Dallas, Texas
    Welcome to THR.

    I'll second the SIG Classic series as one of the simplest in terms of takedown and operation. One lever flip and the slide is off. All the (mechanical) safeties are internal.

    Another excellent choice, in my opinion, is the CZ75 family. I consider the 75 to be an 'evolved HiPower'. A decocker model, such as the PCR (CZ75D compact) shouldn't bite your web too badly, either, and meets your criteria of simplicity.

    After handling the Browning/FN PRO series and the Beretta PX4 I find them to have good ergonomics and traits that would lend themselves to what you want, should you decide to go polymer.


    Regards,
    Rabbit.
     
Thread Status:
Not open for further replies.

Share This Page