Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Slim 1911 grips

Discussion in 'Handguns: Autoloaders' started by jpatterson, Jan 17, 2010.

Thread Status:
Not open for further replies.
  1. jpatterson

    jpatterson Member

    Joined:
    Dec 30, 2007
    Messages:
    400
    Location:
    PNW
    Like some of you, I have baby hands.

    This makes double-stack handguns particular difficult for me, so I went with a 1911. I still could use a little bit less space, so I've been looking into slim 1911 grips.

    Does anyone else use these? Do they actually provide more space, or is it negligible? Any company you'd recommend?

    Thanks in advance!
     
  2. MICHAEL T

    MICHAEL T Member

    Joined:
    Feb 3, 2004
    Messages:
    6,011
    Location:
    outback Kentucky
    If you get the slim grips you will also need to change the bushing in the frame They help if you have a small hand so does a flat mainspring housing and a short trigger Kind of custom fir to your hand
     
  3. stangfan93

    stangfan93 Member

    Joined:
    Apr 13, 2007
    Messages:
    42
    I have a pair of simonich gunner grips on my 1911. They are 1/4" thick
     
  4. PigButtons

    PigButtons Member

    Joined:
    Dec 25, 2009
    Messages:
    147
    Location:
    N Alabama
    woodgrips.com has the best thin bushings, screws, and bushing removal/installation tools that I've found.
    I happen to like the Alumagrips for the look and feel. You can get them from Midway or Brownells.
    I like the slim grips even though my hands are large, they reduce the width so the pistol doesn't print as much when carrying, and it helps me index to the target better.
     
  5. FMF

    FMF Member

    Joined:
    May 2, 2008
    Messages:
    90
    Thin grips just didn't fill out my mits as well as I'd hoped they would but they sure looked nice and made the gun feel extremely thin. I just switched from the thin grips that came with my Les Baer TRS to some VZ Operator 2 standard size grips. I can attest to how well the surface texture grips my hand.

    Although they don't make the Operators 2 in slims sizes they do make the regular Operators and several of their other styles in slim.

    I haven't noticed a difference in print-ability but someone who tucks their shirts might. The only difference I noticed is how much more grip I have.
     
  6. David E

    David E Member

    Joined:
    Aug 3, 2008
    Messages:
    7,455
    Thin grips can help. So can a "tactical" mag catch (one that's barely extended) and a "swoop" in the left grip panel that allows the thumb to get to the mag catch easier.

    http://www.vzgrips.com/files/Ambi 050-2.jpg
     
  7. smartshooter.45

    smartshooter.45 Member

    Joined:
    Sep 24, 2008
    Messages:
    320
    Location:
    The Great Northwest
    if you google "grips by esmeralda" youll find a good selection of grips. she has a separate slim 1911 grip section. hers come with the slim bushings and screws.
     
  8. Oro

    Oro Member

    Joined:
    Sep 22, 2007
    Messages:
    3,496
    Location:
    WA state
    The standard and price/value winners are usually CMC grips. They come with decent double diamond patterned Cocobolo panels and the screws/bushings you need.

    I bought a Commander with a set of these on it a year ago. The seller said to me, "try those before you take them off, they will shrink your groups." I doubted him, but he was in fact (1/2) right. They didn't shrink my groups, but they made it easier to make tight groups. I could shoot the same, but work less hard. Here's why (I think after a lot of testing/swapping/testing):

    The slim grips reduce the width, and thus the ability of your palm and re-curved finger tips to put pressure on the grips themselves and create an across-the-sight-plane grip tension. This means more of your grip energy is focused on the front strap and back strap when you naturally form your grip. This stabilizes the gun in the fore-aft dimension, which is the angular dimension your finger on the trigger works on to disturb the sights during the trigger stroke. So, you naturally grip the gun with slim grips in a way to stabilize it better to counteract the trigger action.

    All of this dawned on me after reading what Jack Weaver actually wrote about pistol shooting and accuracy, and he focused on a nice, tight, isometric fore-aft grip. This was something I was already incorporating into my grip before I got the slim gripped gun, but it made it very apparent. So, I feel that if you think you need slim grips, not only will it make you feel better it can help you shoot better. A set of the CMC grips are attractive and not terribly expensive; try a set.
     
  9. JDGray

    JDGray Member

    Joined:
    Sep 16, 2005
    Messages:
    5,131
    Location:
    SW MI.
    Love my thin Alumagrips! Once they warm up, that is:D
    IMG_1224.jpg
    IMG_1210.jpg
     
    Last edited: Jan 18, 2010
  10. svtruth

    svtruth Member

    Joined:
    Mar 10, 2005
    Messages:
    1,702
    Location:
    Bradford, VT
    My Para-13

    is only about 1/8" thicker than my Norinco full size. But I have big hands.
    Good luck.
     
  11. crashbuell

    crashbuell Member

    Joined:
    Oct 7, 2007
    Messages:
    54
    Location:
    Southwest Michigan
    Get onto Brownells.com and buy a set of Navirex slim grips. I have a set on my Springfield 1911 and I LOVE them. I got them in mahogany. I have small hands too, and these grips are tiny. And you can get them for about 17 bucks. Cheap and thin.
     
  12. jpatterson

    jpatterson Member

    Joined:
    Dec 30, 2007
    Messages:
    400
    Location:
    PNW
    Crashbuell - I'm looking at what you recommended, I'd like to save as much money as possible. Could you point me in the right direction for the bushing and screws on Brownells? Are they just smaller bushings and screws?
     
  13. CWL

    CWL Member

    Joined:
    Jan 6, 2003
    Messages:
    6,505
    I prefer thin VZ Grips on my M1911s.
     
  14. wrench

    wrench Member

    Joined:
    Jan 23, 2004
    Messages:
    818
    Location:
    minnesota
    I have small hands, and short fingers, and I love 1911 pistols. I tried the slim grips, but didn't like the way it made the grips feel.
    What I've settled on, is regular grips, but a flat mainspring housing, and a short trigger.
    Works perfect for me.
     
Thread Status:
Not open for further replies.

Share This Page