Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Smith & Wessom M66

Discussion in 'Handguns: Revolvers' started by magnumcarry, Sep 15, 2005.

Thread Status:
Not open for further replies.
  1. magnumcarry

    magnumcarry Member

    Joined:
    Aug 17, 2005
    Messages:
    104
    Location:
    Some where in the Dark looking into your house
    Can anyone tell me what a S&W M66 is worth that has a pinned barrel and a recessed cylinder that is in real good shape? I'm thinking of trading a guy for this and I want to know if I'm getting a good deal or not.
     
  2. GUNKWAZY

    GUNKWAZY Member

    Joined:
    Nov 4, 2004
    Messages:
    976
    Location:
    AZ
    What barrel length it has will have an impact on pricing as well as what is real good shape to you ?
    Real good as in, looks new unfired ?
    Looks fired, but has some minor surface scratches ?
    Looks shot a lot, but still feels tight ?
    Also a dash number will help date the gun for you if you don't have a serial number.

    Jeff (GUNKWAZY)
     
  3. magnumcarry

    magnumcarry Member

    Joined:
    Aug 17, 2005
    Messages:
    104
    Location:
    Some where in the Dark looking into your house
    GUNKWAZY, my bad. it has a 2 1/2 inch barrel. the surface is in real good shape, it has been polished so there is no scratches, it's pretty tight, don't seem to have had powerfull loads ran through it and i don't see any frame cutting. i don't have any number at this time, sorry. looks like someone has been babied it and took care of it.
     
  4. RON in PA

    RON in PA Member

    Joined:
    Dec 25, 2002
    Messages:
    2,032
    Location:
    S.E. PA, USA
    $250-$300.
     
  5. magnumcarry

    magnumcarry Member

    Joined:
    Aug 17, 2005
    Messages:
    104
    Location:
    Some where in the Dark looking into your house
    RON in PA, thanks man :)
     
  6. Moonclip

    Moonclip Member

    Joined:
    Apr 27, 2005
    Messages:
    2,766
    Location:
    USA
    Being P&R in the shape it is in with the 2 1/2 in barrel I'd say at least $325-350 would be more than reasonable.
     
  7. Drifter721

    Drifter721 Member

    Joined:
    May 27, 2004
    Messages:
    49
    Location:
    ...
    S&W discontinued the K-frame recently and prices are going up.

    Here where I live that P&R, pre-internal lock, firing pin on the hammer revolver is $400+ all day long. You won't ever lose money on that piece.
     
Thread Status:
Not open for further replies.

Share This Page