Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Smith & Wesson Regulation Police

Discussion in 'Handguns: Revolvers' started by poolboy, Apr 10, 2010.

Thread Status:
Not open for further replies.
  1. poolboy

    poolboy Member

    Joined:
    Apr 10, 2010
    Messages:
    4
    My mother has a nickel smith and wesson handgun that was her uncles who was a chicago policeman in the early 1900's

    It is very clean, I thought it was chrome but I realized after reading this forumn it must be nickle.

    It has smith and wesson on one side of the barrel and regulation police on the other side. On top of the barrel it has "smith and wesson springfeild mass usa pat'd oct 8 01, dec 17 01, feb 6 08, sept 14 08, dec 20 14"
    the serial # is 9660 it has the #349 on the "yoke" . wood knurled grips. pat June 5 1917 on the bottom of the butt.

    The letters on the side of the barrel are very worn and barlely legible. but the gun is very clean

    Do you know what 'size' gun it is and is it worth anything? Should I register it somewhere?

    Ther is also a box of ammunition "Western center fire cartridges" "38 Smith & Wesson 145 grain lubaloy, nickle plated case, inside lubricated - oilproof 50 cartridges.

    Please excuse my ignorance, I am not familiar with guns at all and any help is sincerely appreciated
     
    Last edited: Apr 10, 2010
  2. Radagast
    • Contributing Member

    Radagast Moderator Staff Member

    Joined:
    Dec 24, 2002
    Messages:
    8,148
    Location:
    Australia/OZ
    Poolboy:
    Firstly, most states do not require registration of firearms, so it depends upon the state you are in. Chicago requires registration of handguns but doesn't allow new registrations. There is a court case before the Supreme Court of the United States, McDonald Vs Chicago, which will hopefully overturn that law and force all states to allow the keeping of handguns in their home. We will know for sure later in the year.

    The box of ammunition is from a defunct company. Western ammunition became Winchester Western which became Winchester ammunition. It probably dates to the 1950s. As long as it hasn't been wet during that period it should be perfectly safe to fire. I've personally shot ammunition from the 1960s in that caliber with no problems.

    The Regulation Police was built on the small 'I' frame, which is slightly smaller than the 'J' frame that replaced it and is still in production today. J frame grips will not fit an I frame gun.
    If you take off the grips you will find that the grip frame has a round butt, the timber grips are cut to fit around the butt and extend past it to give a square butt profile. The patent date stamped on the grip is for this design.

    The I frame was introduced in 1896 and was the first swing out cylinder revolver produced by S&W, originally in .32 S&W long caliber. It was later modified to take .38 S&W cartridges. The .38 S&W is an expensive round today and sometimes hard to find as it is not commonly used for self defence, having been made semi obsolete by the more powerful .38 special chambered in a J frame gun. As a result the Regulation Police was discontinued in 1969. For the last 8 years of it's production the Regulation Police was built on the J frame. From 1957 to 1969 it was known as the Model 33.

    Your particular example was manufactured sometime between 1917 & 1938, serial number range over that time was 1 to 47440. Because the Great depression greatly reduced demands for new guns, it's probably safe to assume that your version was manufactured in the 1920s or earlier.

    There is an interesting discussion on developing loads for the .38 S&W here: http://www.thehighroad.org/showthread.php?t=505640

    The .38 Regulation Police is not a particularly desirable gun for collectors, in 2006 the Standard Catalog of S&W gave a value of $295 in very good condition.
     
  3. Guillermo

    Guillermo member

    Joined:
    Feb 20, 2008
    Messages:
    6,346
    Location:
    Austin, Texas
    btw,

    while I am not suggesting that it is valuable, I would check around to see if the ammo and box are collector items

    you never know!
     
  4. poolboy

    poolboy Member

    Joined:
    Apr 10, 2010
    Messages:
    4
    Thank you very much for your input
     
  5. tekarra

    tekarra Member

    Joined:
    Feb 13, 2007
    Messages:
    1,277
    poolboy,
    Hello and welcome to the forum. I hope you will post a photo of your revolver.
     
  6. poolboy

    poolboy Member

    Joined:
    Apr 10, 2010
    Messages:
    4
    I've attached a few photo's
     

    Attached Files:

  7. poolboy

    poolboy Member

    Joined:
    Apr 10, 2010
    Messages:
    4
    Forgot the flip side picture
     

    Attached Files:

  8. tekarra

    tekarra Member

    Joined:
    Feb 13, 2007
    Messages:
    1,277
    poolboy,
    Nice revolver, thanks for the pics.
    May I suggest you post this on www.smith-wesson.com.
     
  9. Old Shooter

    Old Shooter Member

    Joined:
    Feb 10, 2010
    Messages:
    1,040
    Location:
    Virginia
    It seems to be a nice old gun and I am sure it will be worth a good bit to a collector.

    If you are interested in selling, I wish you luck, but does the family history mean enough to keep it?
     
Thread Status:
Not open for further replies.

Share This Page