Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SR 4759 in 45-70

Discussion in 'Handloading and Reloading' started by jgraham1, Apr 20, 2013.

Thread Status:
Not open for further replies.
  1. jgraham1

    jgraham1 Member

    Joined:
    Mar 1, 2005
    Messages:
    28
    Location:
    Virginia
    Made a mistake on my last post, so here it goes again.

    Does anyone have Speer jacketed bullet loading data for 350 and 400 grain bullets using SR4759. It is used for cast bullets, but what about jacketed ones?

    Jerry
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Speer #13 shows its use with 400 grain bullet #2479 as a reduced load powder for modern lever-action strength rifles.
    26.0 Start = 1,184 FPS.
    30.0 MAX = 1,359 FPS.

    Other then that?
    It is too fast burning for normal pressure jacketed bullet loads with either bullet weight.

    rc
     
Thread Status:
Not open for further replies.

Share This Page