Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Stack-on gun cabinet advice needed

Discussion in 'General Gun Discussions' started by rhatimi, Jun 23, 2010.

Thread Status:
Not open for further replies.
  1. rhatimi

    rhatimi Member

    Joined:
    Dec 26, 2008
    Messages:
    16
    Location:
    indiana
    Hi all,
    I recently purchased a stack on gun cabinet that was on sale at dicks, and am pleased with the fact that it offers a way to keep my firearms organized. However I am a bit concerned with the foam barrel rests it comes with. The foam padding seems to absorb the oil from the exterior of the barrels where they come in contact with the foam. I was wondering if there is any problem with this as far as rust or moisture issues. If so what would you guys recomend doing? Any personal experience with this product? I had the idea of putting pecies of cut PVC pipe between the foam and the barrels, would this work:confused:
    -thanks
     
  2. FenderTK421

    FenderTK421 Member

    Joined:
    Oct 7, 2009
    Messages:
    205
    Location:
    Alaska
    I own several. no problems at all, although mine have hard plastic barrel rests. If you are really concerned I would purchase some automotive type padded loom clamps and install them bent open. Techtran makes good ones, very inexpensive. Can't recall the Part numbers off the top of my head. I would probably get 1" padded loom clamps and bend them in half. If your rifles can't fit 2 to 1 per clamp just use 1 per, bent double. they are less than a dollar a piece. Try any heavy duty parts house; ie... anyone that sells Kenworth or Freightliner parts should stock Techtran. I was going to use them to sort some bigger rifles to keep them from rubbing eachother. Soon as you pick one up you will get the idea. I am assuming you have no problem shooting some self tappers through your cabinet in order to customize it.
     
  3. postalnut25

    postalnut25 Member

    Joined:
    Mar 8, 2010
    Messages:
    538
    Location:
    Colorful Colorado
    Another option would be to put all your rifles in Gun Socks before you place them in the cabinet.
     
  4. bannockburn

    bannockburn Member

    Joined:
    Apr 24, 2007
    Messages:
    13,750
    rhatimi

    I would second postalnut's suggestion about using Gun Socks to protect your long guns. I also store my handguns (wrapped in silicone cloth), in gun rugs in the safe. This method has worked extremely well at protecting my guns for many years.
     
  5. loadedround

    loadedround Member

    Joined:
    Feb 18, 2006
    Messages:
    3,343
    Location:
    Valley Forge, Pa
    ...also a strong believer in silicone treated gun socks.
     
  6. 230therapy

    230therapy Member

    Joined:
    Aug 10, 2008
    Messages:
    764
    Location:
    Virginia
    No issues here, but I keep the area air conditioned and I check all my guns frequently.
     
  7. Mudinyeri

    Mudinyeri Member

    Joined:
    May 8, 2010
    Messages:
    628
    I've never seen a Stackon with foam rests but I would think as long as you keep the air inside the cabinet dry, you should have no problem with rust. Use silicone socks as suggested above or put dessicant packets in the cabinet. I like the ones with the indicator that turns a different color when they need to be renewed.
     
  8. dagger dog

    dagger dog Member

    Joined:
    Jan 30, 2008
    Messages:
    2,695
    Location:
    SO. IN
    My Stack-On came with the hard plastic barrel rests, but has the foam padding on the walls and bottom. I have not had any rusting or corrosion on any rifles or hand guns, from contact with the foam, and several rifles have steel butt plates that rest against that foam at the bottom of the locker.

    I purchased a GunSaver dehumidifier, it mounts to the bottom at the back of the locker and has a six foot cord with a removable plug, took me less than 30 minutes, you just drill a 1/4" hole to run the cord through, it comes with stand off mounting brackets and has a lifetime warranty, form the Gunslick people.

    It raises the temp in a closed locker just a few degrees from the ambeint room temp and stops any condensation, draws very little amperage and cost under 30 bucks. You can go a little better grade with their GoldenRod, but the GunSaver has worked for me now going on 5 years. You can find them at Midway USA and sometimes they run the Gunsaver on special
     
  9. oneounceload

    oneounceload member

    Joined:
    Apr 24, 2008
    Messages:
    15,710
    Location:
    Hot and Humid FL
    Besides the gun socks, try storing your guns barrels down instead of up - any oil in the action won't creep into the wood and your barrels won't be in contact with the foam
     
  10. Boba Fett

    Boba Fett Member

    Joined:
    Dec 9, 2008
    Messages:
    1,243
    Location:
    Texas ~ Join the NRA & TSRA
    @rhatimi

    I've been considering one of the Stack-on safes. How do you like it and which model did you get? Link?


    I know that on one of the safes my family had, they used to put small squares of non-acidic paper into the slots before setting the guns in the slots.

    Not sure why they always did that, but they too were foam barrel rests, so maybe they just wanted to keep the foam off the barrel for some reason :confused:
     
  11. ArmedLiberal

    ArmedLiberal Member

    Joined:
    Jun 8, 2008
    Messages:
    324
    Location:
    Sacramento, CA
    Don't forget to bolt it to the floor and/or wall.
     
  12. CTGunner

    CTGunner Member

    Joined:
    May 31, 2009
    Messages:
    934
    You could call Stack On and see what they have to say. Perhaps they will send you the hard plastic rests.
     
  13. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    Put Pig Mats on the bottom. When they get soaked, throw them away and put down some more. Although, I have to question why you would apparently put so much oil on your firearms that it runs down them onto the floor. :confused:
     
  14. oneounceload

    oneounceload member

    Joined:
    Apr 24, 2008
    Messages:
    15,710
    Location:
    Hot and Humid FL
    You don't have to put too much oil to have it migrate over time, especially if it is on a gun you shoot rarely
     
  15. ThePunisher'sArmory

    ThePunisher'sArmory Member

    Joined:
    Jun 23, 2009
    Messages:
    888
    Location:
    Belleville, Il
    Id say its no prob. My carpeted gun rests soak up the oil and no big deal. For the little moisture that may be in the case I use those little silica packs that some products get sold with. I just throw those in the bottom of the case, not touching any of the gun stocks though, and have never really had rust issues. Of course I do wipe down my guns ALOT..........OCD I guess ;->
     
  16. rhatimi

    rhatimi Member

    Joined:
    Dec 26, 2008
    Messages:
    16
    Location:
    indiana
    Boba Fett, I have the Stack-on 10 Gun Steel Gun Cabinet and would recommend this cabinet if you want to organize your firearms but aren't worried of burglars. However it's construction is sturdy enough for my needs. All in all its a great value priced cabinet and can help save space. non-acidic paper? might have to look into that.

    As a response to the above question the problem I was having was that the light coating of Break free CLP that I put on the outside of the barrel was being soaked up by the foam barrel rest padding, not because of over oiling.

    -Thanks for all the responses, keep the advice coming!
     
    Last edited: Jun 24, 2010
Thread Status:
Not open for further replies.

Share This Page