Tommygunwinter
Member
- Joined
- Dec 24, 2015
- Messages
- 9
Hi,
Not a new topic, but I'm out of ideas. I need to remove the two pins which hold the trigger and "knock off" to the lower tang. Small pins, rounded ends, and for the life of me I cant get them out. Soaked them in penetrating oil, then Hoppes 9, tapped then hit them with steel and brass pins.
Other than putting a torch on it, which I dont want to do, any other suggestions??
Thanks much!!
Thats the link the schematic if you're interested. The pins are both numbered 99. The knock off is 294.
https://www.uberti-usa.com/sites/default/files/originals/product-manuals/1885_single_shot.pdf
Not a new topic, but I'm out of ideas. I need to remove the two pins which hold the trigger and "knock off" to the lower tang. Small pins, rounded ends, and for the life of me I cant get them out. Soaked them in penetrating oil, then Hoppes 9, tapped then hit them with steel and brass pins.
Other than putting a torch on it, which I dont want to do, any other suggestions??
Thanks much!!
Thats the link the schematic if you're interested. The pins are both numbered 99. The knock off is 294.
https://www.uberti-usa.com/sites/default/files/originals/product-manuals/1885_single_shot.pdf