Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Suggestion, please.

Discussion in 'Handguns: Autoloaders' started by jrbrown1991, May 23, 2008.

Thread Status:
Not open for further replies.
  1. jrbrown1991

    jrbrown1991 Member

    Joined:
    May 23, 2008
    Messages:
    13
    Any suggestions on double-stack full size .45 that shoot non-FMJ (I.E. Hydrashok) reliably?

    Prefferably without grip safety, or magazine detach safety. Also, prefferably not a decocker-safety, but I'll consider that as well.
    It will be used for carry, so reliability is #1.

    The larger the grip, the better. I have a 90-two with a Hogue grip on it, and it's still considerably too small. I can't get a proper grip, and it hurts my fingers.

    [​IMG]

    Thanks!
     
  2. HighRoad

    HighRoad Member

    Joined:
    Apr 19, 2008
    Messages:
    85
    g21 SF FTW
     
  3. Treo

    Treo member

    Joined:
    Nov 30, 2007
    Messages:
    3,110
    Location:
    Co. Springs
    Cz 97 B
     
  4. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    In addition to those, the S&W M&P with the large grip (three are supplied), or perhaps the full-size H&K USP.
     
  5. Quiet

    Quiet Member

    Joined:
    Apr 29, 2007
    Messages:
    3,062
    Location:
    bouncing between the 909 & the 702
    posting lag
     
  6. Quiet

    Quiet Member

    Joined:
    Apr 29, 2007
    Messages:
    3,062
    Location:
    bouncing between the 909 & the 702
    Since you want a beefy grip, check out...

    [no grip safety, no magazine disconnect, no manual safety]
    Glock Model 21
    H&K USP-45 (LEM trigger module)
    S&W M&P-45

    [no grip safety, no magazine disconnect, manual safety, no decocker]
    Ceska Zborojoka CZ-87B
    EAA Witness
    H&K USP-45 (Variant 9 & 10 trigger module)

    [no grip safety, no magazine disconnect, manual safety with decocker]
    FN FNP-45
    H&K Mark 23
    H&K USP-45 (Variant 1 & 2 trigger module)
    MRI Baby Eagle
     
  7. jrbrown1991

    jrbrown1991 Member

    Joined:
    May 23, 2008
    Messages:
    13
    Thank you for the replies.

    Quiet, that is an impressive list.

    The EAA witness is looking like my favorite there. 12 round, external hammer & safety. DA/SA
    From EAA site, it appears that the full-size Witness .45 are all stainless... Do they have a blued version, or would I have to put DuraCoat on it?

    One last question (I hope :D)
    Is the Witness extremely reliable? Can I put JHP through it?

    Thanks!!
     
  8. Quiet

    Quiet Member

    Joined:
    Apr 29, 2007
    Messages:
    3,062
    Location:
    bouncing between the 909 & the 702
    The EAA Witness (.45ACP), MRI Baby Eagle (.45ACP) and CZ-97B are essentialy the same gun. They are all .45ACP versions of the CZ-75.

    EAA imports the Italian made Tanfoglio version (Witness).
    MRI imports the Israeli made IWI version (Baby Eagle).
    CZ USA imports the Czech made CZ version (CZ-97B).

    Capacity (10 rounds) is the same on all three current production versions.

    The Witness is only offered in "stainless" in the steel framed version and "blued" in the ploymer framed version.
    The Baby Eagle and CZ-97B are both only offered with a "blued" finish.

    The Witness and CZ-97B are both DA/SA with no decocker.
    The Baby Eagle is DA/SA with decocker.

    From personal experience...
    Both the Ceska Zborojoka CZ-97B and EAA Witness (10mmAuto) are accurate, reliable and have a really beefy/thick grip.

    I owned a CZ-97B and sold it because I found it to be too big for my hands.
    Only fired 230gr FMJ through it since it was to big for me for every day use and was just a range gun. Not sure how reliable it would be with JHP rounds, but it was 100% reliable with FMJ.

    I handled my friends Witness, but it was in 10mmAuto. He had both the full sized and compact versions in 10mmAuto and he has his compact version on his CA CCW permit. Both his 10mmAuto Witness were 100% reliable with FMJ and JHP rounds. Not sure how the .45ACP version would be though.
     
  9. Quiet

    Quiet Member

    Joined:
    Apr 29, 2007
    Messages:
    3,062
    Location:
    bouncing between the 909 & the 702
    From personal experience...
    The Glock Model 21, Glock Model 21SF and H&K USP-45 are all reliable with FMJ & JHP rounds.

    I've used all three and own the Glock Model 21SF.
    It has the smallest feeling grip.

    Out of the three, the H&K USP-45 has the thickest feeling grip but it was not as beefy as the CZ-97B.
     
  10. Robert14

    Robert14 Member

    Joined:
    Apr 27, 2008
    Messages:
    26
    Location:
    Tennessee
    Check out the HK USP and the new HK45 before you buy. You will be upset if you don't & shoot one after buying something else.
     
  11. jrbrown1991

    jrbrown1991 Member

    Joined:
    May 23, 2008
    Messages:
    13
    It is not possible for me to "try" them, there are no rental ranges anywhere near me.

    Thanks though.
     
Thread Status:
Not open for further replies.

Share This Page