Taurus PT99

Status
Not open for further replies.

Sifu Davo

Member
Joined
Mar 23, 2004
Messages
4
Location
Canberra, australia
G'day from Oztralia

I've got a Taurus PT99AFS. I'm having a consistent problem:confused:

- a fired case still in the chamber
- a new round trying to get into the same chamber (nosing out of the magazine)
- result = jamomatic

Anyone out there had this problem or can suggest cause and cure?

Cheers


Sifu Davo
 
With the weapon pointed in a safe direction - load up a magazine with a few rounds (9mm dummy rounds/snapcaps are better, but most folk don't have those laying around), chamber a round (KEEP THE FINGER OFF THE TRIGGER), and work the slide to chamber and eject the rounds. If the rounds fail to eject when hand-cycling unfired ammo, you probably have a broken extractor.
 
Hi rbernie

Yep - tried cycling by hand with dummy ammo and every 4 or 5 rounds it jammed. So, it looks like I need to buy a new extractor. Thanks for your advice and the offer of a beer, anytime you're in Australia, stands.

Cheers


David
 
Check both the extractor and its spring, and I'd recommend replacing both at the same time.
 
PT99 extractor problem

Hi Rbernie

Fitted both - works perfectly. I had to buy a Beretta 92 extractor and spring from the Numrich people, cos I couldn't get any Taurus parts in Australia. The Numrich people were real fast in getting the parts out to me in Australia (I've been out of town for a few days and just got around to fitting the parts).

Thanks very much for your help - the offer of a few beers stands if you ever visit Down Under.

Cheers


David
 
Status
Not open for further replies.
Back
Top