tractorshaft
member
Ladies & Gents,
After trying almost everything out there in a spray bomb, easily available to the "Walk-In" crowd, I have found the holy grail of spray paint. It sticks to just about anything and is tougher than most of the "Bake-On" (Low-temp) finishes (Better than ALL of the ones I have tested, up to what a plastic or fiberglass stock will handle temp wise anyways (OOA 120-150F). Here is what you will get for your $4.98... (Enough for 3 coats on 2 guns), you have to TRY to make it run, it is very "Sticky" in composition and you dont necessarily need to prime (Although I do prime in a color of my finish color), YMMV.
Shown here in "Black" on a hand laid up fiberglass Marlin 1895GG buttstock and fore end.
I hope this saves someone some time and money, last time I checked I have spent over $200.00 in the last year "Experimenting" and "Testing" this stuff. Please dont ask me for a scientific analysis, methodology or other "Proof". Spend the five bucks and give it a shot, you will not be disappointed. It is every bit as durable as Brownell's Alumahyde II and goes one better in that it is textured out of the can! My "Scientific" durability testing consists of a pointed metal can opener and a random orbital sander with 400 Grit sandpaper and a 5lb wieight and timer. This stuff appears to be epoxy in base (Its the only thing that resists abrasion this well and I can "Smell" it when I "flash it off" over a convection heater.
The final finish is a very nice pebbled "Matte", not too reflective but has enough sheen to it to look nice? The texture does not get slippery when wet and is not aggressive enough to wear clothes or cheek skin appreciably.
I hope the pictures explain this better than I can. Irrespective of my narrative, give it a try! It really is a good, durable, nice looking spray can finish you can buy locally without a hazmat charge for other paint. It is 2x better and tougher than the other products sold specifically as synthetic gunstock finish if anyone was wondering...
Here is a tip for ANY of this stuff, try to dry it in a very low humidity environment , I prop them up in the corner near my wood stove for a week. It makes a HUGE difference in the final durability of almost any of these type paints. Let me hear about your "Favorites"!
Enjoy,
I have seen this paint in several "Firearm" suitable colors, green, Black, sorry pink lovers, havent seen it in that, YET
After trying almost everything out there in a spray bomb, easily available to the "Walk-In" crowd, I have found the holy grail of spray paint. It sticks to just about anything and is tougher than most of the "Bake-On" (Low-temp) finishes (Better than ALL of the ones I have tested, up to what a plastic or fiberglass stock will handle temp wise anyways (OOA 120-150F). Here is what you will get for your $4.98... (Enough for 3 coats on 2 guns), you have to TRY to make it run, it is very "Sticky" in composition and you dont necessarily need to prime (Although I do prime in a color of my finish color), YMMV.
Shown here in "Black" on a hand laid up fiberglass Marlin 1895GG buttstock and fore end.
I hope this saves someone some time and money, last time I checked I have spent over $200.00 in the last year "Experimenting" and "Testing" this stuff. Please dont ask me for a scientific analysis, methodology or other "Proof". Spend the five bucks and give it a shot, you will not be disappointed. It is every bit as durable as Brownell's Alumahyde II and goes one better in that it is textured out of the can! My "Scientific" durability testing consists of a pointed metal can opener and a random orbital sander with 400 Grit sandpaper and a 5lb wieight and timer. This stuff appears to be epoxy in base (Its the only thing that resists abrasion this well and I can "Smell" it when I "flash it off" over a convection heater.
The final finish is a very nice pebbled "Matte", not too reflective but has enough sheen to it to look nice? The texture does not get slippery when wet and is not aggressive enough to wear clothes or cheek skin appreciably.
I hope the pictures explain this better than I can. Irrespective of my narrative, give it a try! It really is a good, durable, nice looking spray can finish you can buy locally without a hazmat charge for other paint. It is 2x better and tougher than the other products sold specifically as synthetic gunstock finish if anyone was wondering...
Here is a tip for ANY of this stuff, try to dry it in a very low humidity environment , I prop them up in the corner near my wood stove for a week. It makes a HUGE difference in the final durability of almost any of these type paints. Let me hear about your "Favorites"!
Enjoy,
I have seen this paint in several "Firearm" suitable colors, green, Black, sorry pink lovers, havent seen it in that, YET
Last edited: