Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Twist Rate Question

Discussion in 'Rifle Country' started by BridgeTooFar, Feb 10, 2012.

Thread Status:
Not open for further replies.
  1. BridgeTooFar

    BridgeTooFar Member

    Joined:
    Feb 7, 2010
    Messages:
    209
    If you can get a rifle in multiple twist rates (in this case, a T3 Lite in .223 with a twist rate of 1:12 or 1:8), why would you ever go for the slower rate (1:12)? I suppose if I know I'll only be shooting lighter bullets, maybe it would be ok, but if all the variables of cost are the same, why wouldn't I want the faster rate just in case I wanted to shoot the heavier stuff?
     
  2. gp911

    gp911 Member

    Joined:
    Oct 30, 2005
    Messages:
    1,141
    Location:
    OH
    That's the thing, it's all about the intended purpose. If you want to shoot prairie dogs with the 45-50 grain varmint ammo the 1:12 twist is optimal for that and will still stabilize the commonly available 55 grain stuff as well. The 1:8 sounds like a great compromise if you're mostly shooting 55gr+, but the 1:12 definitely has its place.
     
  3. BridgeTooFar

    BridgeTooFar Member

    Joined:
    Feb 7, 2010
    Messages:
    209
    I suppose my question really surrounds whether or not the faster twist (1:8) would not stabilize the light weight bullets. Meaning, what if I want to shoot the whole spectrum? As in, use it for both coyotes and as a backup (with the proper rounds) deer rifle.
     
  4. MtnCreek

    MtnCreek Member

    Joined:
    Dec 8, 2010
    Messages:
    3,952
    Location:
    West GA
    I read that really fast twist (like 1:7) can spin a very lightly constructed bullet apart. Seen that in a couple of gun mags, no first hand exp.

    I heard from a few people here that there is an optimum twist rate for a particular bullet and it is possible for the increased RPM to hurt accuracy. This I've never understood.
     
  5. Red Tornado

    Red Tornado Member

    Joined:
    Jun 22, 2004
    Messages:
    1,469
    Location:
    NE Arkansas
    Some of the really light bullets can fly apart if they're spun too quickly. I don't know if 1 in 8 is fast enough, but I'm pretty sure there are examples of 1 in 7 spinning 40-45 grain varmint bullet too quickly for it to maintain integrity. For my purposes, a 1 in 9 was a great compromise as it covered all of my shooting. It worked for a range of 45 to 69 and seemed optimal for 69gr, but that's all I tried. YMMV.

    How heavy to do you want to go?
    RT
     
  6. carbine85

    carbine85 Member

    Joined:
    Jul 1, 2007
    Messages:
    2,090
    Location:
    Southwest, Ohio
    The 1:8 is perfect for the .223 /5.56 all the way up to 69gr. I don't understand why ever one wants the 1:7 when the most accurate target barrels produced for the AR15 are 1:8
    1:12 to too slow for anything above 55gr.
     
  7. BridgeTooFar

    BridgeTooFar Member

    Joined:
    Feb 7, 2010
    Messages:
    209
    Probably not anything above 68/69gr. if I had to guess. I'm just sort of spitballing a setup right now, and realized that the T3 came in both of those twist rates in .223.
     
  8. gp911

    gp911 Member

    Joined:
    Oct 30, 2005
    Messages:
    1,141
    Location:
    OH
    I too have heard of 1:7 spinning apart lightweight varmint bullets but I have yet to hear a similar report about 1:8, though that twist rate has only recently become popular. I would think the 1:8 would shoot everything okay and be optimal for the 68/69gr stuff while still being very good with the 55-62gr bulk ammo and safe for the 45gr stuff. That's my educated guess on the matter anyway.

    In other words, the 1:8 sounds right for you.
     
  9. AABEN

    AABEN Member

    Joined:
    Nov 23, 2011
    Messages:
    953
    Location:
    Priceton IN
    I thank the 1/12 if you are not going to use any over 65gr 1/9 75gr 1/8 80 gr 1/6.5 90gr. For 40gr up to 55 gr 1/14
     
  10. MtnCreek

    MtnCreek Member

    Joined:
    Dec 8, 2010
    Messages:
    3,952
    Location:
    West GA
    Length, not weight. IMLE, a 1:9 will stabilize a 77gr SMK, but will not stabilize a 75 gr A-Max (a-max is longer).
     
Thread Status:
Not open for further replies.

Share This Page