Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Used my puller - on some WWB ammo!

Discussion in 'Handloading and Reloading' started by kellyj00, Jul 30, 2007.

Thread Status:
Not open for further replies.
  1. kellyj00

    kellyj00 Member

    Joined:
    Apr 12, 2007
    Messages:
    797
    This weekend I recieved my bullet puller from MidwayUSA.

    First thing we did.... pulled apart about a dozen 45acp mistakes. ;-) not an easy task...had to beat the heck out of them.

    Then, we got curious and pulled apart some brand new Winchester White box ball ammo. The 45acp uses about 4 grains of a very flaky powder that looks exactly like Hodgdon Titewad shotgun powder. The 9mm uses a little less powder (about 3.8 grains) of the exact same powder.

    Just thought I'd share this with you folks. I don't use w231 powder, so I don't know what it looks like. I should've taken some pictures.
     
  2. highlander 5

    highlander 5 Member

    Joined:
    Sep 15, 2006
    Messages:
    2,347
    Location:
    lynn,ma
    Try using a 3 ft long piece of a 4x4 post to rap the puller on I think you,ll have better luck in pulling bullets
     
  3. SASS#23149

    SASS#23149 Member

    Joined:
    Jan 1, 2003
    Messages:
    1,869
    Location:
    Washougal,Wa
    try using the puller like a dead blow hammer....don't let it 'recoil' when you strike it,control the 'recoil' with your wrist.
    they can break,so using wood instead of concrete is a good idea....

    dont ask me how I know this.
     
  4. caz223

    caz223 Member

    Joined:
    Dec 27, 2002
    Messages:
    1,739
    Location:
    SW Michigan
    I have heard through the grapevine that they use a non-canister grade variant of WSF in their .40, but have no idea what they use in 9mm.
    Of course, it's all hearsay and speculation, so who can say?

    I would love to find out what powder they use in winclean ammo. Wow that stuff burns clean.
     
  5. The Bushmaster

    The Bushmaster Member

    Joined:
    Jan 29, 2005
    Messages:
    7,872
    Location:
    Ava, Missouri
    Hit it on the end of that 4x4 post...
     
  6. kellyj00

    kellyj00 Member

    Joined:
    Apr 12, 2007
    Messages:
    797
    I read in the instructions about hitting the end grain of some wood. didn't know what difference that made, guess it makes sense that with more wood between you and something solid, more of a "dead blow" effect.

    thanks.
     
  7. Gearhead Jim

    Gearhead Jim Member

    Joined:
    Feb 12, 2003
    Messages:
    322
    Location:
    Illinois
    Hitting it on a tile floor can also leave dents in the tile...
    :(
     
  8. 870pilot

    870pilot Member

    Joined:
    Jul 3, 2007
    Messages:
    20
    Location:
    New England
    i found it easier to use the shellholder from my press than the provided holder with the rubber o-ring gizmo... and on wood, not tile... sorry...
     
  9. kellyj00

    kellyj00 Member

    Joined:
    Apr 12, 2007
    Messages:
    797
    hey, that's a darned good idea. I'll try that out when I get home!

    I had about 20 9mm's that I had over-seated and wanted to be safe. After trying to pull one and being unsuccessful after about 30 wacks on a board, I decided to just trash them and start over. Shoot.
     
  10. syh

    syh Member

    Joined:
    Aug 2, 2007
    Messages:
    48
    Had that ever damaged the shellholder?
     
  11. Lone_Gunman

    Lone_Gunman Member

    Joined:
    Dec 24, 2002
    Messages:
    8,056
    Location:
    United Socialist States of Obama
    what is cannister grade versus non-cannister grade?
     
  12. Sunray

    Sunray Member

    Joined:
    May 17, 2003
    Messages:
    11,352
    Location:
    London, Ont.
    "...that looks exactly like..." Other than the colour and style of powder(flake, extruded, etc), you can't tell anything about any powder just by looking at it.
    A Mk I rock about the size of a cantaloupe works well for bashing a kinetic bullet puller on. For some reason, concrete doesn't work as well. Density, I think. Wood is too soft and a carpeted floor just doesn't work.
     
  13. R.W.Dale

    R.W.Dale Member

    Joined:
    Oct 14, 2005
    Messages:
    11,399
    Location:
    Northwest Arkansas
    I've found that impact pullers work really really really well if you strike a piece of cardboard laying flat on concrete. This works 300% better than beating on a piece of wood. The cardboard does a fine job of protecting the puller.

    That shellholder in place of a collet Idea works GREAT
     
  14. koja48

    koja48 member

    Joined:
    Feb 21, 2005
    Messages:
    1,912
    Location:
    SE WA State
    Had that ever damaged the shellholder?

    Damaged the rim on a case a time or two . . . then finally bought an RCBS puller die/collets and ain't ever looked back . . .
     
  15. BigJakeJ1s

    BigJakeJ1s Member

    Joined:
    Sep 26, 2005
    Messages:
    792
    Location:
    Arlington TX
    Hornady cam-lock puller works great for me, and a single lever activates the collet very quickly and easily.

    Andy
     
  16. BAT1

    BAT1 Member

    Joined:
    Nov 28, 2006
    Messages:
    513
    Use the right die

    Use the # 2 [ lee] die for .45 in your kinetic puller. 2-3 raps on concrete should do it. Who knows what WWB uses, probably Chinese fire cracker powder. Good groups.
     
  17. U.S.SFC_RET

    U.S.SFC_RET Member

    Joined:
    Dec 5, 2005
    Messages:
    1,771
    Location:
    The Old Dominion State
    While you are at it (pulling WWB) weigh the powder and bullets seperately if you are curious.
     
  18. CypherNinja

    CypherNinja Member

    Joined:
    Nov 18, 2005
    Messages:
    811
    Location:
    Willoughby, Ohio
    Lone_Gunman: "Batch" powders are what ammo manufacturers use. Every time they receive a new batch of powder the test it in the lab to see what the proper charge weight should be. The batches will generally all be pretty close to one another, but not exactly the same.

    "Canister" powders are what get sold to the public (in canisters ;)). These powders are produced/blended for very high uniformity batch to batch. This makes them more expensive, but it also means buying a new can of Bullseye and using the same load as the last can won't blow up your gun.
     
  19. DBR

    DBR Member

    Joined:
    Dec 28, 2002
    Messages:
    1,071
    Location:
    Vermont
    As I understand it the commercial producers load to pressure, not velocity. That is why different lots perform differently.

    The commercials cannot have any idea what gun a load will be used in so they load to a 3x standard deviation max pressure. Average pressure will be significantly less than this.
     
  20. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    22,837
    A hardball load of 4 gr .45 and 3.8 gr 9mm implies a VERY fast burning powder, not 231 or any reasonable variant.

    Looking at published data, that powder probably does come off the Titewad production line, but the above cautions about bulk versus cannister lots apply. Just because it likely has Titewad chemistry and processing does not mean it is the same as what you buy under that label and you do NOT have permission to reload with 4 gr Titewad. I have seen NO pistol data for Titewad and it is so fast burning as to make experimentation risky.
     
  21. brentfoto

    brentfoto member

    Joined:
    Jun 28, 2007
    Messages:
    340
    Location:
    California
    Wish I had purchased mine sooner. It's worth the additional expense to set up with separate collets. Only caveat is that you can't pull lead WC/SWC. Give Hornady a call about that before purchasing.

    I would imagine one could literally pull hundreds of rounds an hour, if necessary, and with practice. People have reported doing so.

    For any circumstance where you need to pull more than a bullet or two, I would recommend the Hornady, which screws in like a die to your press.
    Mine is affixed to a single-stage press that I currently use solely for that purpose.

    Mind you, I was getting tired of all the loud noise with the inertia hammer pullers and I don't think my dog appreciated it much, either. I was using my ear muffs/ears when doing so and now I don't have to do that one either.

    What prompted my purchase was pulling about 250 40S&W using the hammer. Never again!:banghead:
     
  22. 10xforever

    10xforever Member

    Joined:
    Oct 31, 2006
    Messages:
    39
    Location:
    Northeast Ohio
    I use a piece of butcher block maple and it works much better than softer wood. Use the dead blow technique and don't allow the puller to rebound. It still takes a lot of pounding to remove the bullet.
     
Thread Status:
Not open for further replies.

Share This Page