Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

vinyl tubing for powder charge......

Discussion in 'Blackpowder' started by quiknot, Oct 26, 2006.

Thread Status:
Not open for further replies.
  1. quiknot

    quiknot Member

    Joined:
    Jan 17, 2006
    Messages:
    150
    Location:
    wisconsin
    I am looking at cutting some 1/2" vinyl tubing to make some quick re loading charges...was wondering if there might be any static in the vinyl to cause a unsafe situation...plan on having a lead ball on one end and 1/2" dowel in the other.....thanks
     
  2. Steve499

    Steve499 Member

    Joined:
    Dec 7, 2005
    Messages:
    628
    Location:
    Central Missouri
    Don't forsee any problems for you. I've used vinyl tubes for some time and like them.

    Steve
     
  3. MutinousDoug

    MutinousDoug Member

    Joined:
    Oct 24, 2005
    Messages:
    848
    Location:
    Colorado
    I don't think this is a big hazard but plastic material can store an electrical charge where a conductive metal or plastic material dissipates said charge. Unlikely you will carry your vinyl cartridges into an atmosphere that would create a dangerous potential (electrical power plant, or heavy machinery that is not grounded). I think this is why Ruger tells you to only use powder measures made for BP measuring for their guns that use BP.
    OTOH: Wool jacket pocket, 9% RH, lotta walking around, could store a charge sufficient to cause a spark when introducing cartridge to gun? Ever zap your sister on the ear after scooting your sock covered feet across the carpet?:evil: That's fun. I don't know whether T/C speedloaders are conductive. I use them.
    /Just throwing it out there.
     
  4. Car Knocker

    Car Knocker Member

    Joined:
    Dec 28, 2002
    Messages:
    3,809
    Location:
    Salt Lake City, UT
  5. MutinousDoug

    MutinousDoug Member

    Joined:
    Oct 24, 2005
    Messages:
    848
    Location:
    Colorado
    Car Knocker:
    I am convinced. I 've heard this was the case but never seen it demonstrated. I knew that static charge could ignite BP but didn't know the conditions required.

    Thanks for the info,

    MutinousDoug
     
  6. Car Knocker

    Car Knocker Member

    Joined:
    Dec 28, 2002
    Messages:
    3,809
    Location:
    Salt Lake City, UT
    I'll grant that the experiment that I cited leads me to believe that it would be extremely difficult to ignite black powder in its granular state or even finely powdered BP as long as it is at rest. However, I am not convinced that if a static spark were introduced while pouring black powder into a powder measure, that the dust particles suspended in the air wouldn't ignite and serve as an ignition source to the remainder of the granular powder. In point of fact, numerous silo and grain elevator explosions attributed to static electricity and finely divided dust floating in the air leave little doubt in my mind that such a thing is possible; unlikely perhaps, but certainly in the realm of possibility.
     
  7. gmatov

    gmatov member

    Joined:
    Dec 24, 2005
    Messages:
    355
    Nope,

    Actually, you chicken type guys are the only ones who keep this alive.

    Scientific types debunk, you guys keep going to these sites and say, "Well, it COULD happen!"

    Hundreds have posted the "BOOM" theory. Thousands have posted the "BULL****" rebuttal, yet every couple days someone else says "I heard that if I scuff my feet over the carpet before I go hunting in the morning, I will blow my fool head off from static discharge."

    Y'know, it's a good thing them iggeramuses in the 14th and 15th century did not know about electricity, and electrostatic discharge. We'd still be shooting bows'n arrers as the state of the art.

    Hell, that could be a GOOD thing, but it is not THE thing. The genie is out of the bottle.

    I gotta go to the thread that says you gotta have an incadescent flash to burn BP, etc.

    Cheeres,

    George
     
Thread Status:
Not open for further replies.

Share This Page