Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WASR keyholing

Discussion in 'Rifle Country' started by bgrav321, Aug 20, 2010.

Thread Status:
Not open for further replies.
  1. bgrav321

    bgrav321 Member

    Joined:
    Jul 31, 2007
    Messages:
    190
    Highroaders,

    I have a WASR which I was fairly pleased with. Shot awful with wolf, but I got some Yugo stuff and it was doing well with it. Then I noticed the holes in the paper were huge. Fairly certain it is keyholing; I know what a 7.62 hole looks like and these are oblong, and as nice as having a 14mm hole is, I think there are other problems...

    If you're going to say "that's what you get for getting a Century WASR", I really don't care. That's not the point.

    Any thoughts as to what is causing it, or how does one fix it?
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Put a hard backer behind the paper target.

    If the paper is free hanging it will try to get out of the way and the holes will not be perfectly round.

    rc
     
  3. boricua9mm

    boricua9mm Member

    Joined:
    Jul 28, 2005
    Messages:
    1,212
    Location:
    Tampa Bay, FL
    Pull off the muzzle break and have a look at the crown of the barrel. A damaged crown could be the culprit. Also, take a look at the muzzle break itself. You shouldn't see any copper strikes. If so, that's no bueno.
     
  4. briansmithwins

    briansmithwins Member

    Joined:
    Aug 1, 2005
    Messages:
    4,063
    What's the bore and throat look like? It takes work to shoot out a 7.62x39 barrel, but the throat will go eventually. BSW
     
  5. wally

    wally Member

    Joined:
    Jan 2, 2004
    Messages:
    12,352
    Location:
    Houston, Tx
    I'm betting on rcmodel's solution.
     
  6. Nugilum

    Nugilum Member

    Joined:
    Dec 17, 2007
    Messages:
    1,003
    Location:
    Texas Panhandle
    What's the history of your WASR?

    Is it a Century? Or was it assembled by someone in their garage? Is it from an old parts kit that still had the original barrel?
     
  7. ms6852

    ms6852 Member

    Joined:
    Oct 19, 2009
    Messages:
    1,531
    Location:
    TEXAS
    What is the rifle twist on your barrel and the bullet weight you fire? Maybe you just need to match both and key holing will stop.
     
  8. The Lone Haranguer

    The Lone Haranguer Member

    Joined:
    Jul 30, 2006
    Messages:
    11,717
    Location:
    Johnson City, TN
    If the bullets are in fact "keyholing," i.e., from lack of rifling stabilization, I would think it would be grossly inaccurate with any and all ammo. I suggest firing into a piece of white cardboard with a rigid mounting instead of the tissue-like paper that targets are typically made of.
     
  9. noyes

    noyes Member

    Joined:
    Aug 15, 2010
    Messages:
    35
    Maybe the bullets are hitting the ground just in front of the target ,?
     
  10. bgrav321

    bgrav321 Member

    Joined:
    Jul 31, 2007
    Messages:
    190
    OK the rifle is a century, per the OP.

    I checked the muzzle brake, and it's loose. How do I tighten it?
     
  11. bgrav321

    bgrav321 Member

    Joined:
    Jul 31, 2007
    Messages:
    190
    Oh and there are copper colorings in the muzzle brake as well, another point for that theory.
     
Thread Status:
Not open for further replies.

Share This Page