sparkyv
Member
Unfortunately, I don't weld, but ordered replacement from Lee. I'll make do on my Rock Chucker in the meantime.
What’s on your wish list?
- Thread starter AR. Hillbilly
- Start date
- Status
WestKentucky
Member
Call them. One of mine had a casting flaw and I noticed it while mounting my press. I had a new arm in the mail about 3 days later. No questions, no cost.
sparkyv
Member
Thought about calling them, but:
1. the press is 6 yrs old, so it's out of standard warranty
2. website support says parts for that model are exhausted, but Lee will honor 1/2 price replacement on the new model which I don't like
3. digging deeper, I realized that the same toggle is used on the new version, so I ordered a replacement and a spare, so I'm GTG for years to come
1. the press is 6 yrs old, so it's out of standard warranty
2. website support says parts for that model are exhausted, but Lee will honor 1/2 price replacement on the new model which I don't like
3. digging deeper, I realized that the same toggle is used on the new version, so I ordered a replacement and a spare, so I'm GTG for years to come
AJC1
Member
I'd love to find a decent 45acp 200 swc mold and I hope to go home and make a 35 cal gas check maker... buying gas checks for 3 cents or more is just lame...
WestKentucky
Member
With that out of the way... how did you break a casting that large?
BigBlue 94
Member
A .229" mold for casting gas check 60gr bullets for the 22 Savage HP
Or a common supply of jacketed .228 plinking bullets for it
30 Herrett dies
300 Savage cases
Otherwise im pretty set to load any of my like 37 calibers.
Or a common supply of jacketed .228 plinking bullets for it
30 Herrett dies
300 Savage cases
Otherwise im pretty set to load any of my like 37 calibers.
Mark_Mark
Member
- Joined
- Jan 9, 2021
- Messages
- 17,854
Hayatt in charlotte NC has tons of 300 savage Cases! mabey you can work a deal with a NC member
GeoDudeFlorida
Member
- Joined
- Dec 1, 2020
- Messages
- 11,020
A quick release collet for the Unimat. I finally found a free spin tail. 
.
.ctgrizzly2hunt2
Member
Oh bummer, I must of hit it at the right time. Keep checking, they may make it available on line again.
kmw1954
Member
I have a nice Lee 6 cavity I'd be willing to part with. PM if interested.
kmw1954
Member
Would like to find a New model Lee Value Turret press so I could retro-fit it to a 3 Hole. Then also a RCBS 30cal collet.
rfwobbly
Member
What’s on your wish list?
"World peace" and everything else Miss America contestants ask for.
"World peace" and everything else Miss America contestants ask for.
GeoDudeFlorida
Member
- Joined
- Dec 1, 2020
- Messages
- 11,020
What’s on your wish list?
"World peace" and everything else Miss America contestants ask for.
Okay, sad reality, here. The Latin root of "peace" is the same word as for "pacify." In its oldest and truest form, the word means, "to render silent." The origins of the word "peace" go back to the Roman Republic when Augustus Octavius spoke before the Roman Senate about the army's northern campaigns. "Peace," he said, "means the suppression of meaningful resistance to the will of Rome." Thus was proposed the Pax Romana, "The peace of Rome," during which time the Empire engaged in ruthless conquest.
GeoDudeFlorida
Member
- Joined
- Dec 1, 2020
- Messages
- 11,020
If you don't mind a suggestion, you may also want to consider learning to make traps and nets. Some things you don't want to try and shoot.
rfwobbly
Member
In the modern parlance... they were building walls and "securing their boarders".
Mark_Mark
Member
- Joined
- Jan 9, 2021
- Messages
- 17,854
they sell it at Cabelas?If you don't mind a suggestion, you may also want to consider learning to make traps and nets. Some things you don't want to try and shoot.
GeoDudeFlorida
Member
- Joined
- Dec 1, 2020
- Messages
- 11,020
Yeah. Okay. Well, during the Pax Romana (approx. 27BC-180AD) Emperor Hadrian built a lovely wall - in Scotland. It wasn't exactly part of Rome...In the modern parlance... they were building walls and "securing their boarders".
Howland937
Member
You can buy a shovel just about anywhere. Just don't forget where you dug your pit and fall in it... especially if you put pointy sticks in it.
I do have to add, I need a new chronograph. My old, discontinued one has apparently been blown off the table too many times.
Mark_Mark
Member
- Joined
- Jan 9, 2021
- Messages
- 17,854
I blow my chrono the 1st day. Was a little embarrassed, so I just finished it off and mailed it back to Amazon
sparkyv
Member
IDK, but this is the second time. They both broke at the same location.
AR. Hillbilly
Member
Adding to my list a powder checker die.
tightgroup tiger
Member
My needs are modest, but I would like to have a dedicated deprimer. I was getting ready to buy the Lee APP deluxe for $79.95 and they all disappeared.
I saw someone put a post on here about a depriming press from Lee, I believe it was Toprudder but I could never find it listed anywhere.
Maybe Lee decided to not bring it out due to being so far behind with production. Who Knows.
I just want something simple and fast for depriming to keep that mess off my progressive presses.
Oh well, it's not a hardship, just something I wish for.
I saw someone put a post on here about a depriming press from Lee, I believe it was Toprudder but I could never find it listed anywhere.
Maybe Lee decided to not bring it out due to being so far behind with production. Who Knows.
I just want something simple and fast for depriming to keep that mess off my progressive presses.
Oh well, it's not a hardship, just something I wish for.
- Status
