Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What 10mm

Discussion in 'Handguns: Autoloaders' started by Werewolf, Nov 3, 2006.

Thread Status:
Not open for further replies.
  1. Werewolf

    Werewolf Member

    Joined:
    Sep 12, 2003
    Messages:
    4,192
    Location:
    Oklahoma
    This thread http://www.thehighroad.org/showthread.php?t=231168 has convinced me that my next hand gun purchase will be chambered in 10mm.

    I'd considered the 10mm in the past but settled on .40S&W because of the cost of 10mm ammo. Now I've been reloading for 3 years and ammo cost isn't an issue.

    Soooo....

    Any suggestions? (Cost isn't an issue. A gun lasts forever - ammo only for as long as it takes to shoot it.)
     
  2. atblis

    atblis Member

    Joined:
    Feb 19, 2005
    Messages:
    4,531
    Location:
    Neither here nor there
    I'd buy a COLT DE

    The COLT Delta Elite is the best 10mm ever made. Parts are easy to get, 1911 parts galore. They can be had in stainless. They will only get more valuable.

    Oh look, there's one for sale on the board.
    http://www.thehighroad.org/showthread.php?t=230694"]http://www.thehighroad.org/showthread.php?t=230694"]http://www.thehighroad.org/showthread.php?t=230694

    I also like the EAA Witness a lot, and would recommend them except for that EAA is a piece crap company. The topend Witnesses might be worth your time to look at.
     
    Last edited: Nov 3, 2006
  3. RJW

    RJW Member

    Joined:
    Dec 18, 2004
    Messages:
    15
    10mm

    Kimber and Springfield make them. I am a personal fan of the Dan Wesson. have a Razr and a Bobtail.
     
  4. telli97

    telli97 Member

    Joined:
    Apr 4, 2005
    Messages:
    76
    Location:
    Illinois
    10MM

    I agree about the choices already stated (Kimber, DW, Colt), don't forget about the Glock Model 20. I didn't know if you were looking for a 1911 style or any other suggestions. I've shot my friends G20 and it's pretty nice.
    JP
     
  5. Houser52

    Houser52 Member

    Joined:
    May 27, 2006
    Messages:
    119
    Location:
    North Carolina
    If you can, try a Dan Wesson Bobtail 1911 10mm before you make your decision.
     
  6. Werewolf

    Werewolf Member

    Joined:
    Sep 12, 2003
    Messages:
    4,192
    Location:
    Oklahoma
    Thanks for the suggestions so far...

    Re: Dan Wesson

    I've been looking at those and they look good. CZ picked up DW and I own 3 CZ firearms and would have no problems picking up a 4th.

    I knew about the Glock 20. Too light in my opinion with the polymer frame for a full power 10mm. Explanation: I owned a Glock 22 for a couple of years - never could get used to it, funky grip angle, mushy trigger and the wieght made the .40S&W very snappy as opposed to my CZ-75B in .40S&W which is a joy to shoot.

    IMO a 10mm needs the weight of an all metal gun.

    I also went to the S&W web site looking for info on the 1076 and 1066 models. Tried a caliber search but nothing is listed for 10mm. Does S&W make any 10mm handguns anymore? If so how are they listed?

    RE: Colt Delta Elite - very nice, very nice indeed. I'll take a real hard look and consider one but not being a huge fan of Colt, their pricing or their attitude towards the civilian market those opinions will probably prejudice my decision somewhat.
     
  7. MachIVshooter

    MachIVshooter Member

    Joined:
    Aug 11, 2005
    Messages:
    14,846
    Location:
    Elbert County, CO
    No, but there are many used 1006's, 1066's and 1076's on the market. They usually run between $400-$600 in decent condition.

    As an aside, the S&W 10XX series are arguably the most robust 10mm auto's ever made. I love my 1006; it has swallowed even the most punishing handloads without a hiccup. They are accurate as well.

    I also have a Kimber and an EAA witness in 10mm, both of which I'm quite fond. The Witness is a compact model and is my everyday CCW.
     
  8. Shootcraps

    Shootcraps Member

    Joined:
    Jan 18, 2004
    Messages:
    1,007
    The Colt Delta Elite is an excellent choice. So is the Kimber Eclipse.
     
  9. crunker

    crunker member

    Joined:
    Sep 9, 2006
    Messages:
    349
    AMT Javelina, or Kimber's Raptor. It would be great if STI started to make 10mm 1911s. A GLOCK 20 is a good choice as well since it's a bit cheaper, more available, more accessorizable, and higher capacity.

    Will you be using the 10mm for hunting, CCW, target-shooting, or just because it's so awesome? :D

    Also, be sure to check out AR-15 10mm uppers at http://www.paladinarmory.com/SBR.htm
     
  10. Majic

    Majic Member

    Joined:
    May 3, 2003
    Messages:
    5,370
    Location:
    Virginia
    Get a S&W M610 and come hang out on the revolver forum. :D
     
  11. Reyn

    Reyn Member

    Joined:
    Mar 20, 2005
    Messages:
    484
    Location:
    AL
    Ive never had a problem with my G20. 15rd mags is also a plus.
     
  12. Vitamin G

    Vitamin G Member

    Joined:
    Aug 9, 2003
    Messages:
    934
    Location:
    Monroeville, PA (Home of the Zombies)
    Dont overlook the EAA witness for about $300. I purchased a glock 20, and i'm probably looking at having the frame chopped & reduced.
    Delta Elite is #1 for sure, but EAA would be my #2
     
  13. Slvr Surfr

    Slvr Surfr Member

    Joined:
    Aug 5, 2006
    Messages:
    298
    Location:
    DFW, Texas, USA
    Dont overlook the G20 based on your experiance with a G22. The G20 is a large frame double stack and handles even the hottest load from Double Tap with ease. (135 gr 1600 FPS).

    I love mine.
     
  14. Werewolf

    Werewolf Member

    Joined:
    Sep 12, 2003
    Messages:
    4,192
    Location:
    Oklahoma
    All of the above except hunting...
     
  15. Ohen Cepel

    Ohen Cepel Member

    Joined:
    Feb 4, 2003
    Messages:
    2,647
    Location:
    Where they tell me to go
    I'm not a Glock fan. However, 15rds of 10mm in a 20 changed my mind! If you can deal with the Glock "issues" it's a great platform.

    That being said, the Kimber Eclipse is a sweeeeeet pistol. I don't have enough rounds through mine to talk about it a lot. However, thus far it's been very accurate with only a few hi-cups from aftermarket mags. Lot of nice quality features on it out of the box.

    I like the DW's and think they are also a very good buy if you want a metal gun and the price of the others is too much.

    I'm not a Colt fan. Hard to find and often they want a quart of blood and $1000 for one. Just not that into them.
     
  16. Werewolf

    Werewolf Member

    Joined:
    Sep 12, 2003
    Messages:
    4,192
    Location:
    Oklahoma
    My only experience with Kimber (other than a bad one with my Son in Law's) is with the Kimber Ultra Tac 2 I own. Now that's one hell of a pistol; accurate as hell for a 3" bbl .45ACP. The only downside is the wierd take down method. I expected it to take down like a 1911 - NOT! Does the Eclipse model everyone has mentioned take down like a 1911 or like the Ultra Tac 2?
     
  17. Blacklabman

    Blacklabman Member

    Joined:
    Jul 2, 2004
    Messages:
    179
    Location:
    N. Georgia
    I am not a Kimber fan by any means. After dealing with a Royal II, Kimber is off the "to buy" list forever.
    On the other hand, my G20's and G29 have been flawless.

    The ammo I use for SD and CCW are
    DT 165gr. @ 1400fps/ 718ft/lbs- Glock 20

    The 10mm also makes an excellent hunting round.
    On Thursday I took a GA 4 point at 32 yards using a G20 with 6" KKM barrel and 230gr WFNGC.
    The rounds performance was excellent.

    Recoil from the 10mm even with the 200gr,215, 230gr loads is if anything, nill

    IMO- The G20 is the perfect 10mm platform, and the 10mm is the perfect pistol round.
     
  18. the pistolero

    the pistolero Member

    Joined:
    Apr 14, 2006
    Messages:
    783
    Location:
    Beaumont-Port Arthur, Texas
    I think all the Kimber 3" barreled pistols take down like that; the full-size 5" barreled pistols are just a little different from the GI-type 1911, as I think most of them have the full-length guide rod. Just a little different, but not much, only difference being that with the FLGR, you have to use a little wrench to push the plug down as you rotate the bushing with it. (Or am I telling you things you already know? :D ) I have a Kimber Tactical Ultra II as well...believe you me, I uttered a few choice words when I misplaced that little metal piece you stick through the guide rod as you break the pistol down. :evil: Someone told me a paper clip would be a good replacement for that, though.

    Ahem. Back on topic. I love the 10mm; the only one I have so far is the Kimber Stainless Target II, but I really like it. So far the only ammo approaching full-power that gun has seen is the 175-grain Winchester Silvertips, but they handle them well. (As an aside, it'll be interesting to see how the Double Taps will sound when you shoot them under a metal roof, as they just got installed on the pistol range at the Golden Triangle Gun Club. :D) I'd like to get a DW sometime, as I've heard nothing but good things about them as well...
     
  19. Peter M. Eick

    Peter M. Eick Member

    Joined:
    Dec 28, 2002
    Messages:
    5,035
    Location:
    Houston, TX
    I agree with the 610 post above. Great combination for the round. 6 shots and quick reloads. More steel then I care to shake a fist at. Plenty of barrel to nurse the most out of the round. Yep, great combination.
     
  20. orchemo

    orchemo Member

    Joined:
    Sep 23, 2005
    Messages:
    9
    G20 as mountain back-up

    I recently purchased a G20 as a mountain/woods gun. I usually carry a 44 Mag, but the 15 round magazine X 3 mags = lots of firepower and about the same weight as my superblackhawk.

    I have a G21 and G30, but I like the extra power of the 10mm. DoubleTap 200 gr Beartooth rounds with Hornady 200 XTP in a third magazine.

    Eric
     
  21. Lennyjoe

    Lennyjoe Member

    Joined:
    Dec 24, 2002
    Messages:
    6,069
    Location:
    Southwestern Ohio
    All depends on your available $$

    If you got the bank then go with a 1911 style 10MM.

    If your looking for a woods gun that you can holster and not worry about beatin it up then a G20 is the ticket. Easy on the wallet too at just under $500.

    Another option is the S&W 10 series as well.

    If you want a low priced 10MM then the Witness is the choice.
     
  22. nitesite

    nitesite Member

    Joined:
    Aug 10, 2004
    Messages:
    1,177
    Location:
    North Alabama, USA
    I am always amazed that my G29 shoots so softly for it's size and weight. I get more recoil when I shoot my S&W 442 Airweight Centennial .38 Special with 158-gr +Ps.

    Perhaps it is the combination of the grip width and angle, plus the Pearce +0 mag extension. It's a sweet shooting pistol with some serious firepower and performance. I normally recover 180-gr Gold Dot bullets that measure over 1" in diameter. Not bad for a short barrelled pistol I can easily conceal. I can't get a .45ACP to do this from a 3.9" barrel......

    10mm-gold-dot-180.jpg

    I'm so pleased with this G29 that I may never feel a need to own another Glock.
     
  23. hso

    hso Moderator Staff Member

    Joined:
    Jan 3, 2003
    Messages:
    48,719
    Location:
    0 hrs east of TN
    A friend of mine and fellow THR member picked up the Witness 10mm. It shoots like a dream.
     
Thread Status:
Not open for further replies.

Share This Page