Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What is your favorite AR15 & why?

Discussion in 'Rifle Country' started by Slabside, May 13, 2003.

Thread Status:
Not open for further replies.
  1. Slabside

    Slabside Member

    Joined:
    Dec 24, 2002
    Messages:
    69
    Location:
    USA
    What is your favorite model? This can be a complete stock model from a manufacturer or one that you've built. If it's one you've built, how about giving us the rundown of parts supplied and costs.

    Thanks and look forward to many good responses.
    Slabside
     
  2. Marko Kloos

    Marko Kloos Moderator Emeritus

    Joined:
    Dec 20, 2002
    Messages:
    2,587
    Location:
    Enfield, NH
    Mine's my first and (so far) only AR: a DPMS 16" HBAR with A2 upper. It's very handy, and the heavy barrel takes a good while to heat up during extended shooting sessions. It's been 100% reliable so far, using nothing but LC milsurp and UMC "WallyWorld" ammo. It's accurate, fun to shoot, and very ergonomic. The only mods I added are an AccuWedge, an ErgoGrip, and a BSA 4MOA red dot sight. I use Israeli Orlite mags, which have been flawless so far.

    [​IMG]
     
  3. El Tejon

    El Tejon Member

    Joined:
    Dec 24, 2002
    Messages:
    18,085
    Location:
    Lafayette, Indiana-the Ned Flanders neighbor to Il
    Slab, I use Wilson UTs with different grips and shorter stocks (how can you not modify a AR--they just sooo cool).

    We are very fortunate that we have many fine AR makers now. Lots of good ones abound. Good shooting.
     
  4. AK103K

    AK103K Member

    Joined:
    Dec 27, 2002
    Messages:
    5,774
    I have three an Armalite M15A4(T), a Colt SP1, and a Bushmaster Dissipator. The Armalite is the most interesting by far as its the most accurate. The other two are just, AR's. Well, for that matter, they all are just AR's, but the Armalite will put your eye out. :)
     
  5. modifiedbrowning

    modifiedbrowning Member

    Joined:
    Dec 25, 2002
    Messages:
    2,204
    Location:
    Bozeman, MT
    I only have one right now, a Bushmaster Dissipator, so that is my current favorite.:D
     
  6. Hkmp5sd

    Hkmp5sd Member

    Joined:
    Dec 24, 2002
    Messages:
    6,513
    Location:
    Winter Haven, FL
    My favorite AR-15 technically isn't an AR-15. It's my Colt M16A1. :) Also have a Colt SP1.
     
  7. Captain Scarlet

    Captain Scarlet Member

    Joined:
    May 9, 2003
    Messages:
    113
    Location:
    cloud base
    COLT GOVERNMENT MODEL AR15A2 [preban]
    standard A2 configuration w/flash hider & bayonet lug
    because it looks like the current issue M16A2 in use by the
    military [except for the slab side receiver] screw front pivot pin.
    :cool:
     
  8. Penman

    Penman Member

    Joined:
    Dec 26, 2002
    Messages:
    576
    My favorite would have to be the only one I own, a preban Bushie A2. One of these days I need to take it out and shoot it.
     
  9. 444

    444 Member

    Joined:
    Dec 26, 2002
    Messages:
    7,978
    Location:
    Ohio
    I own nine poodleshooters. My faviorite started as a Bushmaster 16" with A1 sights. I then purchased another upper in the form of a Bushmaster 16" flat top upper with a Wilson muzzle brake from a guy on TFL. I added an Aimpoint ML2 sight on a GG&G cantelever mount, a Surefire 500 series light, and a single point tac sling made by The Wilderness. I also added a rear back up iron sight also from GG&G. I practiced with it extensively and then took it on it's shake down cruise at the Gunsite Carbine Class. After completing the course in fine style I decided on a few modifications. I replaced the single point sling attachment plate from The Wilderness (it was actually made by GG&G) with one by Daniel Defense. It is basically the same thing only the Daniel Defense model offsets the sling attachment point downward to keep it out of the way of your hand when you are running the charging handle. I had caught my thumbnail on the original one several times and it hurt. To add to my comfort when running the charging handle, I also added an extended tac latch to the charging handle. Mine is just some no-name item I picked up at the gunshow for a fraction of what the same thing by a major company would have cost. I then replaced the Surefire 500 series light/handguard set up with a Knights Armament RAS II. This gave me a free floated barrel, and four rails to attach accessories. I realized at the Gunsite course that the 500 series light was not the way to go. The 900 series light is much more practical, if you have a rail system to mount it on. The 900 series light is mounted to a vertical foregrip. The vertical foregrip has an ARMS type mount, so you can add or remove the light from your rifle in seconds. This also allows you to use the same light on any of your ARs that has a rail system to mount it on. The problem is that I have not purchased the new light set-up yet. After installing the RAS II, I added a KAC vertical foregriip. The RAS II also required me to change mounts for my Aimpoint, and I chose one from ARMs which also allows me to add or remove my Aimpoint in seconds with the throw of a lever. While I was at it, I also replaced the rear back up iron sight with one from ARMs. I then took this set up on a shake down cruise at the Frontsight four day practical rifle course and it shined above all others.

    So, in summary, my favorite AR set up would be a Bushmaster 16" flat top. ARMs back up iron rear sight, KAC RAS II with a Surefire 900A tac light. Single point tac sling using a Daniel Defense attachment plate and a tac latch. And an Aimpoint ML2 in an ARMs mount.
    This rifle has proven to be very accurate, totally reliable, ergonomic, and easy to carry. I feel that I arrived at this set-up through a lot of shooting, trial and error, experience shooting a wide variety of other set-ups, and personal experience.
     
  10. BusMaster007

    BusMaster007 Member

    Joined:
    Dec 31, 2002
    Messages:
    901
    Location:
    Upper Left Coast
    Since I referred to the image here before, I was directed to it, and ALL OF MY TEXT DISSAPPEARED from the post...:fire:
    Like we all remember which 'images' we've used previously...

    That's only a LITTLE IRRITATING.
    Perhaps the Moderators could arrange for the text to remain while we are directed back to the 'image' to retrieve it.
    Geez, I hate it when this happens.
    Please change this on this Forum. If we go back to get the image and we've 'selected all' text to copy and paste it back on the blank reply, we'll lose it again when we try to 'copy shortcut' from the 'image'. It makes no sense.

    SO, my question was directed at 444:
    What ARMS throw lever mount did you use for the Aimpoint? and congratulations on your classes.
    I must wait to take some formal training and I'll do it locally first.
    One day, it'll happen. Gotta be 'responsible' for the Wife & Kids for a while before I start in with 'classes', you know? :D

    My favorite is my Dissipator:
    (Foghorn Leghorn voice:)
    "I like my Diss, I say, DISSIPATOR, boy! PRE, I say, PRE-ban, that is!"
    http://www.thehighroad.org/attachment.php?s=&postid=246483

    sheesh, good thing it was a short post to begin with
     
  11. Slabside

    Slabside Member

    Joined:
    Dec 24, 2002
    Messages:
    69
    Location:
    USA
    Good stuff folks. Keep it comin'. Pics...if you got 'em, show 'em.
    :)
     
  12. 444

    444 Member

    Joined:
    Dec 26, 2002
    Messages:
    7,978
    Location:
    Ohio
    The ARMs mount is the #17, I don't know the number for the rings. I will tell you what I do when I want to buy anything for my AR, again, this was a trial and error process with some disappointments along the way. I call or E-Mail the Mid-South Tactical Network (MSTN) http://www.mstn.biz/ . I don't worry about shopping around for the best price and all that. I find that I get the best customer service, fast turnaround time, and competitive pricing with MSTN. I just E-Mail them and tell them what I want and who I am. They have my billing info and address. Usually three days later I am installing the part. You can find pretty much everything I did to my faviorite AR on their webpage. When I needed this ARMs mount, I e-mailed MSTN, and said I need an Aimpoint mount for a RAS II and three days later the package arrived. I didn't know anything about them, I didn't ask any questions. The mount was perfect and exactly what I needed.
     
  13. BusMaster007

    BusMaster007 Member

    Joined:
    Dec 31, 2002
    Messages:
    901
    Location:
    Upper Left Coast
    Thanks for the link, 444.
    It's on file. I'll check 'em out.
    Professional, good quality service is always worth not worrying about the price, isn't it? :)
     
  14. firestar

    firestar member

    Joined:
    Jan 2, 2003
    Messages:
    1,761
    SP1 because the triangular forarm feels so nice and the 20" bbl has the best balance and pointing ability for me. Makes it almost feel decent.:neener:
     
  15. Badger Arms

    Badger Arms Member

    Joined:
    Jan 1, 2003
    Messages:
    3,738
    Location:
    Harnett County, NC
    DPMS upper with 20" heavy stainless barrel, free-floated DCM handguards, and a Bushmaster lower. I'm still going to have to get a better rear peep and two-stage trigger, but it's still my favorite.
     
  16. AK103K

    AK103K Member

    Joined:
    Dec 27, 2002
    Messages:
    5,774
    Did someone say pre ban Dissy and pics? :)
    [​IMG]
     
  17. Admiral Thrawn

    Admiral Thrawn Member

    Joined:
    Dec 27, 2002
    Messages:
    167
    Location:
    Adelaide, South Australia
    If they were legal, these would be awesome to have:

    Colt M4 Commando (safe/semi/full-auto trigger group, 11.5 inch barrel, bayonet lug, birdcage flash supressor, adjustable stock)

    [​IMG]

    Colt M4 Carbine (safe/semi/full-auto trigger group, 14.5 inch barrel, bayonet lug, birdcage flash supressor, adjustable stock)

    [​IMG]
     
  18. cratz2

    cratz2 Member

    Joined:
    Dec 24, 2002
    Messages:
    4,233
    Location:
    Central IN
    My favorite AR is my only AR. RRA basic jobbie. I had a Bushmaster prior that had a solid, non-ported, non-braked barrel and if I had the RRA to do over, I'd prefer the solid barrel. Actually, if I were to ever get another one, it would probably be a DPMS20" heavy stainless barrel flat top.

    My oldest seems to like it as well and notice... finger is nowhere near the trigger and I didn't even have to remind her. :p

    And by the way, that's not just some childish floral print, it's tactical urban playground camo. ;)

    [​IMG]
     
Thread Status:
Not open for further replies.

Share This Page