Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What kind of accuracy?

Discussion in 'Rifle Country' started by PinnedAndRecessed, Nov 3, 2006.

Thread Status:
Not open for further replies.
  1. PinnedAndRecessed

    PinnedAndRecessed member

    Joined:
    Aug 10, 2004
    Messages:
    1,542
    My deer rifle is a Remington 700 BDL in 30-06. At the range today with Winchester SuperX ammo my best 3 shot group, at 100 yards, on a bench rest, was 1 1/2 inches.

    What kind of accuracy should I be looking for out of a factory hunting rifle?
     
  2. cheaptrick

    cheaptrick Member

    Joined:
    Oct 27, 2006
    Messages:
    132
    Location:
    NC
    MOA for me for a hunting rifle.
     
  3. Shawnee

    Shawnee member

    Joined:
    Oct 17, 2006
    Messages:
    3,306
    Location:
    Along "That Dark and Bloody River"
    Hi P&R...

    Not really much wrong with 1.5" groups. If it can do that well it can probably do better too. Other important variables in the equation are the ammo and the shooter.
    Speaking just for myself, there have been days when I used a rifle I knew could shoot into MOA but I still didn't git 'er done. :uhoh:
     
  4. browningguy

    browningguy Member

    Joined:
    Jul 21, 2004
    Messages:
    4,578
    Location:
    Houston, TX
    1 1/2" is ok for hunting, if you want it better then try some different brands and different bullet weights, you may find one your gun likes better.
     
  5. Froggy

    Froggy Member

    Joined:
    Nov 2, 2006
    Messages:
    235
    Location:
    Southern Arizona
    Which is pretty darn good. That was the best.... what was the "average"? 1.5 MOA is nothing to sneeze at. You might find this discussion interesting:

    http://www.chuckhawks.com/practical_accuracy.htm
     
  6. cheaptrick

    cheaptrick Member

    Joined:
    Oct 27, 2006
    Messages:
    132
    Location:
    NC
    You may also try match ammo or reloading to wring the most out of a factory rifle.

    My earlier post was what "I'm looking" for in a hunting rifle.
    As stated, certainly nothing wrong with a 1.5" group.

    Good shooting!
     
  7. rangerruck

    rangerruck Member

    Joined:
    Jan 12, 2006
    Messages:
    8,374
    Location:
    Texas, baby!
    what you got is fine. when you really get used to it, you will shrink that down to 1 moa , im sure. you may also achieve slightly better results from other ammo, who knows? but what you got now sounds fine to me, all the way out to about 300 yds or so.
     
  8. dfaugh

    dfaugh Member

    Joined:
    Dec 10, 2004
    Messages:
    1,994
    You say "shooting from a bench" but don't specify how. If you're holding the gun, and resting your elbows, etc. (similar to the "steadiest" position you might see in the field") then 1.5" at 100 isn't bad at all. If you're shooting off bags or a good rest, I prefer to see a bit better accuracy out of my rifles than that---because you're not gonna get that solid or steady a rest when in the field. I strive for MOA off bags at the range, because I know I won't get that kinda performance in the field, but there's a small "confidence boost" knowing the gun can shoot that well.

    As others mentioned, try a few different types of ammo, you'll probably find one that'll shoot better than others.
     
  9. Essex County

    Essex County Member

    Joined:
    Mar 9, 2005
    Messages:
    1,247
    I think You're doing fine..........

    One of my favorite sporters is one of my least accurate. It's a 1965 vintage Model 70 and groups hover between 11/2 to 2 inches. It just fits me like an old pair of jeans.....Essex
     
  10. X-Rap

    X-Rap Member

    Joined:
    Sep 23, 2006
    Messages:
    6,651
    I strive for sub moa on all my scoped rifles with 1.5 being the max. I'll try to tweak the load or gun till it shoots or get rid of it. Lifes to short to settle for less.
     
  11. ojibweindian

    ojibweindian Member

    Joined:
    Dec 27, 2002
    Messages:
    2,300
    Location:
    Union Grove, Alabama
    For a factory load, that's pretty good. I used Remington 165gr Core-Lokt in a Winchester 30-06 and got around 1.5" at 100 yards.

    Handloads, using the same bullet and weight, grouped at 5/8". My guess is your rifle could do better with handloads, but it's doing pretty good now.
     
  12. Legionnaire
    • Contributing Member

    Legionnaire Member

    Joined:
    Dec 24, 2002
    Messages:
    4,243
    Location:
    Texas
    I consider a 2" average fine for deer hunting, and wouldn't worry about (although I'd try to improve) groups as much as 4" on a woods gun. I have a couple of sub-MOA rifles, but my hunting guns generally do 2" or there abouts. I'm satisfied with that. "Practical" accuracy is what it's all about in the hunting fields.
     
  13. Nhsport

    Nhsport Member

    Joined:
    Apr 23, 2006
    Messages:
    581
    Look at it this way---You could spend anything from half again as much money for a more primium type ammo up to hundreds or thousands of dollars for trigger ,barrel , bedding and scope improvements and mmight expect your groups to possibly shrink down to one half of your 1 1/2 " . Then you go out into the field to hunt (without the bench ) and that extra 3/4" doesn't mean squat.
    You tested your gun - scope combo and the 1 1/2" group showed you that nothing has been knocked out of wack . If you have some extra time/money stock up on whatever ammo you will be useing to hunt with and practise shooting in the same type of positions you will likely encounter when actually hunting . Offhand , sitting , kneeling . Vary your shooting to match the way you hunt as much as possible.If you hunt from a stand or fixed position get out to that area and pace off some distances so you have an idea of what shots would be possible
     
Thread Status:
Not open for further replies.

Share This Page