Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What's the trick for adjusting Kahr K40 rear sight?

Discussion in 'Gunsmithing and Repairs' started by Oleg Volk, Feb 18, 2003.

Thread Status:
Not open for further replies.
  1. Oleg Volk

    Oleg Volk Moderator Emeritus

    Joined:
    Dec 19, 2002
    Messages:
    9,155
    Location:
    Nashville, TN
    Got a K40 which shoots a bit right (3" at 20ft). Tried to tap the Trijicon rear sight, it won't budge. I hear that there may be a trick to dealing with sights like these (pushing in a particular direction only) or that I might need some tool for adjusting it. I'd rather not break the gun or the sights...so open to advice on the topic.

    Thanks!
     
  2. dfariswheel

    dfariswheel Member

    Joined:
    Dec 26, 2002
    Messages:
    6,121
    Some early Kahr's had sights so loose, they came off.
    Kahr apparently decided to fix the problem permanently, and newer Kahr's have sights so tight, they are almost impossible to move at all. Actually removing the sights is about out of the question.

    I'd give a Kahr a call or email and ask their opinion and advice, before I started banging around on a Tritium sight.

    Regular Kahr sights will move if you use enough force, but you've got to be very careful not to damage the sight's or to upset the metal and lock them in even tighter.

    Contact Kahr.
     
  3. Kahr carrier

    Kahr carrier Member

    Joined:
    Dec 30, 2002
    Messages:
    2,060
    Location:
    WESTSIDE
    Brownells sells a universal sight pusher ,I think it retails around $100.00.
     
  4. VictorLouis

    VictorLouis Guest

    No drift-punch nor hammer on a night sight!

    You risk cracking the tube and ruining the sight.:(
     
Thread Status:
Not open for further replies.

Share This Page