Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Williams Peep Sights for my 10/22

Discussion in 'Rifle Country' started by usp_fan, Nov 10, 2003.

Thread Status:
Not open for further replies.
  1. usp_fan

    usp_fan Member

    Joined:
    Jan 16, 2003
    Messages:
    977
    Location:
    Bismarck, ND
    Who can recommend a good peep sight for my little ruger 10/22? Which williams should I look at? Does someone make a basic post type front sight in the proper height to complement a peep rear?

    Thanks,

    --usp_fan
     
  2. Badger Arms

    Badger Arms Member

    Joined:
    Jan 1, 2003
    Messages:
    3,738
    Location:
    Harnett County, NC
    I've got the Williams peep site set. This is basically a taller front site and the rear sight packaged together. I didn't realize this when I ordered it, but the front blade is REALLY TALL. It's so tall, that I worry it will get bent and/or broken very easilly. You can buy a riser block and a shorter front site if you choose. I really like the fire sites that they sell these days. The whole setup is available at the link below:

    http://www.williamsgunsight.com/rifle1.htm

    [​IMG]
     
  3. Longbow

    Longbow Member

    Joined:
    Dec 29, 2002
    Messages:
    1,145
    Location:
    City by the big lake
    I just picked up one at the show for $13. Making adjustments are not as convenient as dial up ones, but there's really nothing out there for 10/22. This is the best one I tried so far. I really like it!
     
  4. dance varmint

    dance varmint Member

    Joined:
    Jan 17, 2003
    Messages:
    253
    Location:
    Where it's Quality, not Quantity
    I have the Zepher Eagle (yes Zepher, not zephyr) peep sight, which has a hooded black front post, very sharp. The rear aperture is plastic with adjustment screws and an aluminum base. The plastic leaves something to be desired, but it has been working fine for me.
     
  5. Mk VII

    Mk VII Member

    Joined:
    Jan 7, 2003
    Messages:
    1,056
    Location:
    England
    I wish someone would make a set of M1 Carbine-type sights for the 10/22. Unfortunately I doubt enough owners would want to buy them.
     
  6. Longbow

    Longbow Member

    Joined:
    Dec 29, 2002
    Messages:
    1,145
    Location:
    City by the big lake
    I'll buy one! So long its <$100. :)
     
Thread Status:
Not open for further replies.

Share This Page