Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Win Auto Comp

Discussion in 'Handloading and Reloading' started by nelly, Jun 13, 2012.

Thread Status:
Not open for further replies.
  1. nelly

    nelly Member

    Joined:
    May 4, 2012
    Messages:
    11
    Location:
    South Florida
    Hi all, I am shooting 9mm Major in an open compensated G17 & would like to work up some loads using Winchester Auto Comp Powder-does anyone have any load data for this ? I have been using HS6 with 124 FMJ's with good success,& would like to have some additional loads to use also....:) Thanks
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Hodgdons reloading data website has all the data you could need to know for Autocomp powder.
    They sell it.

    Getsum there.
    http://www.hodgdon.com/basic-manual-inquiry.html

    It's way more tested and trusted then what folks might tell you on the lier-net!

    rc
     
  3. sean eady

    sean eady Member

    Joined:
    Jun 23, 2011
    Messages:
    122
    I have only worked up with a 115 grain bullet but this is what I have for a 10 shot string of 5.1 grains of AutoComp through a 3.8 Springfield XDM .

    115 grain zero fmj hp seated to 1.120

    1043 1102 1094 1104 1056 1117 1105 1098 1080 1078
     
  4. furyalecto

    furyalecto Member

    Joined:
    Jul 6, 2007
    Messages:
    30
    Location:
    Central Illinois
    This thread might help on the Enos forums.
    http://www.brianenos.com/forums/index.php?showtopic=153541
    I am running 6.5 grains of Autocomp with a 124 MG RN 9MM at 1.165 OAL. Makes 171PF in an older 5" gun SVI/STI type gun. I seem to be on the low end at 6.5.
    BDS has better links below.
     
    Last edited: Jun 14, 2012
  5. bds

    bds Member

    Joined:
    Jan 10, 2010
    Messages:
    12,973
    Location:
    Northwest Coast
    CAUTION: Loads mentioned on following links are far beyond current published load data and use them at YOUR OWN RISK. Neither the writer, The High Road, nor the staff of THR assume any liability for any damage or injury resulting from use of this information - http://www.thehighroad.org/showthread.php?t=27444


    nelly, you may get more usable responses at brian enos forum (these are specific to Auto Comp and Glock 17):

    http://www.brianenos.com/forums/index.php?showtopic=147000

    http://www.brianenos.com/forums/index.php?showtopic=137728

    http://www.brianenos.com/forums/index.php?showtopic=145390
     
  6. RhinoDefense

    RhinoDefense Member

    Joined:
    Jul 2, 2010
    Messages:
    883
    Yup, get to BE's site. THR is not the site for competition reloading.
     
Thread Status:
Not open for further replies.

Share This Page