Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Win M12 Takedown proceedure

Discussion in 'Shotguns' started by bodiebill, Sep 5, 2008.

Thread Status:
Not open for further replies.
  1. bodiebill

    bodiebill Member

    Joined:
    Jan 5, 2006
    Messages:
    14
    Location:
    Placentia CA
    My friend has a Winchester M12 Takedown model in 20 gauge.
    He does not know how to assy and reassemble the gun.

    Does anyone have instructions for assembly and then reassembly of the barrel/mag tube section to the receiver?

    Here is what we doped out---comments please.
    Winchester Model 12 Take down procedure

    Grip receiver with right hand
    Push magazine lock pin with left hand
    Rotate magazine tube clockwise 23 degrees
    Stroke slide forward until it stops
    Turn barrel and mag tube assy counter-clockwise until it is disengaged from receiver
    Pull barrel/magazine tube assembly forward until clear from receiver.
     
  2. chuckles

    chuckles Member

    Joined:
    Sep 14, 2003
    Messages:
    285
    Location:
    Nevada
    Thats the way I've always done it. The bolt and internals I have no idea. Careful of the threads on the barrel.
     
Thread Status:
Not open for further replies.

Share This Page