Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Winchester model 64A trigger problem

Discussion in 'Gunsmithing and Repairs' started by English Jay, Jul 27, 2006.

Thread Status:
Not open for further replies.
  1. English Jay

    English Jay Member

    Joined:
    Jul 27, 2006
    Messages:
    16
    Hi, this is my first post.
    I've just got a 1973 Winchester 64A in 30-30, it's in nice condition with nice wood and shoots well.
    But I notice one thing; When the hammer is cocked the trigger swings/hangs loose -it isn't sprung forward, also the trigger pull is quite light, perhaps 2 1/2lb.
    Is this normal or is something broken or worn.
    This is my first winchester and the older ones are not common in England so I don't have any reference points.
    Any help would be welcome.

    Jay
     
  2. Ascot500

    Ascot500 Member

    Joined:
    Jul 23, 2003
    Messages:
    187
    Location:
    NC
    IIRC the trigger hanging is normal.
    The light trigger sounds like good fortune.
     
Thread Status:
Not open for further replies.

Share This Page