offthepaper
Member
- Joined
- Dec 5, 2005
- Messages
- 1,446
Anyone using Winchester WST for 9mm loads? I'd like to load some 115 FMJ and 125 cast RN, but haven't found much load data. Anyone use this?
Winchester WST for 9mm
- Thread starter offthepaper
- Start date
- Status
cherryriver
Member
It's really not a good choice for this type of cartridge. Several of the Enos Forum boys have tried and given up.
The pressure curve is too abrupt- the line between good and explosion is too narrow.
Stick to WSF- it's Winchester's solution to the question. It works.
The pressure curve is too abrupt- the line between good and explosion is too narrow.
Stick to WSF- it's Winchester's solution to the question. It works.
Not a good choice. After much expermentation, Silhouette is my choice.
115 gr plated RN over 6.2 ge Silhouette = 1165 fps in my BHP.
147 gr plated RN over 4.3 gr Silhouette = 870 fps in a Glock 19.
Not real hot loads as you can see, but accurate and reliable.
115 gr plated RN over 6.2 ge Silhouette = 1165 fps in my BHP.
147 gr plated RN over 4.3 gr Silhouette = 870 fps in a Glock 19.
Not real hot loads as you can see, but accurate and reliable.
- Status
Similar threads
- Locked
