1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wolf Springs and SP101~22

Discussion in 'Handguns: Revolvers' started by weblance, Sep 16, 2012.

Thread Status:
Not open for further replies.
  1. weblance

    weblance Member

    Sep 15, 2011
    Has anyone tried the Wolf Springs in their SP101-22? I just installed the 8# trigger return spring, and the #10 mainspring in mine. I know they arent designed for the rimfire SP101 and ignition may be a problem, but it sure feels nice in Double Action. I wont get a chance to shoot it for a week, and wondered if anyone has any real first hand experience with these in the .22? I can bump up to the 12# spring if need be, and I also have the 14# mainsprings from my centerfire SP101s. They have to be lighter than the stock SP101-22 mainspring. I kinda wanna slip out back and pop a couple rounds off, but dont usally do that with respect for my neighbors
  2. Naybor

    Naybor Member

    Nov 5, 2010
    Was South East Oklahoma ~ Now Southern Ohio
    I have Wolff springs in my SP101-.357 with good results but can't report on the .22 (yet). The 10# mainspring should be fine ~ I have the 9# in mine with no ignition problems.
    The thing to watch out for in the 8# trigger spring is the trigger reliably returning forward. If problems, you can go back to factory trigger spring.

    Shoot up a box of shells and if no problems, you should be good to go. Remember, every revolver has it's own personality even of the same make/model. What works for one may not work for another. Good luck, have fun, and be careful!
Thread Status:
Not open for further replies.

Share This Page