Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

XDM 9 or Glock M17 or ?

Discussion in 'Handguns: Autoloaders' started by jhop73, Oct 31, 2011.

Thread Status:
Not open for further replies.
  1. jhop73

    jhop73 Member

    Joined:
    Mar 4, 2011
    Messages:
    91
    Location:
    N.W. Ohio
    I have always been a 1911 and revolver guy, i have decided to get a 9mm.
    I am looking for opinions on both guns. Are there any other polymer guns in the $500-700 price range that i should also be looking at?
    the gun will be mainly a range gun, target/plinking.
     
    Last edited: Oct 31, 2011
  2. HOOfan_1

    HOOfan_1 Member

    Joined:
    Aug 11, 2010
    Messages:
    4,698
    Location:
    Virginia
    Do you prefer striker fired? As a 1911 guy you may prefer a gun with a hammer, or you may prefer something different, like a striker fired.
     
  3. jhop73

    jhop73 Member

    Joined:
    Mar 4, 2011
    Messages:
    91
    Location:
    N.W. Ohio
    looking for somthing different.
     
  4. Fishbed77

    Fishbed77 Member

    Joined:
    Nov 23, 2010
    Messages:
    3,039
    Walther P99AS or PPQ (which is just a P99 with a Glock-like trigger setup and revised aesthetics). Both are much nicer to shoot than a Glock or XD (much better triggers and better ergonomics, which are definite pluses for a range gun.)

    And the nice thing is that that, should you decide to use it for defensive purposes, the P99 design is also uber-reliable and very durable.
     
  5. CZ57

    CZ57 member

    Joined:
    Jan 6, 2005
    Messages:
    1,533
    Location:
    Heart of Texas
    XDm with the right backstrap is a beautiful thing. Only thing better is the .45 ACP XDm if you have large hands. The XDm is a 20 round pistol in 9mm. The ergonomics and sights are top notch. ;)
     
  6. Mr.Blue

    Mr.Blue Member

    Joined:
    Aug 21, 2011
    Messages:
    523
    Location:
    Limbo
    IMHO the S&W M&P has the best ergonomics of any polymer gun. The adjustable palmswells really seem to make the gun comfortable for just about anyone. You should rent and shoot all the popular polymers. If you are a 1911 guy, you may not like the Glock grip angle. You will probably prefer the M&P and XD to the Glock.

    Another idea is the CZ SP-01 Phantom. It's a polymer based on the all steel CZ SP-01, which happens to be my favorite non-1911 pistol.
     
  7. Jed Carter

    Jed Carter Member

    Joined:
    Oct 19, 2008
    Messages:
    1,410
    Location:
    LEXINGTON, KY
    I use a Glock G34 9mm in USPSA matches, (a longer version of the G17), for me at least it outperforms all the other poly pistols I have tried. The other polymer candidates were H&K P30L, S&W M&P PRO, Springfield Armory XD, XDm 5.25, and the FNP 9mm. I currently own SIG, Beretta, CZ and Colt 9mm pistols.The only 9mm pistol that I've shot that can out perform the G34 is my STI 1911, way more than your price point. Price of magazines, availability of upgrades like sights and triggers, plus ease of install of these upgrades really points to a Glock. I have about 12 magazines for the G34, installed Dawson Precision adjustable fiber optic sights and a Glocktriggers,com Apex trigger. The trigger alone, was the best investment, literally drop in easy, and it looses all the striker fired trigger creep, it will work on a G17 too. If your only choices are between the G17 and XDm, no comparison for me Glock all the way, M&P Pro a close second, CZ 75 SA third.
     
  8. GLOOB

    GLOOB Member

    Joined:
    Sep 16, 2007
    Messages:
    5,943
    Lots too look at. There have been a lot of good guns made since the G17 which address the Glock's shortcomings. Namely the grip angle and the lack of manual safeties. But IMO these are the best features. The grip angle, in particular, makes the 9mm Glocks fast. (It makes the 40 cal Glocks fast, too, but also borderline painful). The XD, in particular has a much higher bore axis and straigher grip, and you'll feel the difference in recoil and muzzle flip. At least, I do. The XD handles recoil more like a SIG P-series. Once in tune with my Glocks, my rapid fire groups aren't all that much larger than the slow fire ones.

    And then there's the ease of maintenance. I can disassemble and reassemble my Glock with one hand and a toothpick. All except for removing the cup and spring from the striker. The Glock is the only handgun I know of where removing and reassembling the extractor and firing pin/striker is as easy as an afterthought.

    To disassemble the XD, you need to punch out 2 roll pins.
     
    Last edited: Nov 1, 2011
  9. jhop73

    jhop73 Member

    Joined:
    Mar 4, 2011
    Messages:
    91
    Location:
    N.W. Ohio
    the local range does not have a XDM to rent at this time, they do have the glock 17 and S&W m&P available to rent. i might try to stop in there on my lunch break today.
     
  10. Japle

    Japle Member

    Joined:
    Feb 28, 2005
    Messages:
    915
    I carried a Glock 19 daily for 5-6 years. I used it in IDPA competition, too. Never had a problem with it. Then I picked up an XDm at a gun shop.

    Now I carry this. Xdm 3.8 9mm with a JPoint sight.
    This is my idea of a 21st century carry gun!

    XDmJPointandammo.jpg
     
  11. sigarms228

    sigarms228 Member

    Joined:
    Aug 3, 2011
    Messages:
    912
    Location:
    Northern Illinois
    I second the Walthers - P99 AS or PPQ. !!
     
  12. Skribs

    Skribs Member

    Joined:
    Oct 29, 2010
    Messages:
    5,807
    Location:
    Lakewood, Washington
    Throw out what everyone says about ergonomics. Seriously. What's ergonomic for them won't be for you. I've read numerous posts of people saying "I use a 1911 because it's not too fat." Well, I don't use a 1911 because it's too skinny. So if the gun is ergonomic to YOU, go for it.

    Specifically looking at XDm vs. Glock:
    XDm holds 2 more rounds from the standard magazine. You can easily find extended G17 mags that hold 33 rounds, but those would be hard to carry. If you're not carrying, that would be fun.
    XDm does not require you to pull the trigger to break the gun down. This is easier, and I think safer.
    XDm has a grip safety, Glock doesn't. It doesn't bother me either way. You may consider the grip safety to be an extra thing that can break (in that case, go Glock), or you may consider something that may save your life (go XDm), or - like me - it won't impact your decision.

    Overall, they're both very similar. Glock has a bigger reputation for reliability, but that's only because it's older. The XDm is very reliable as well.
     
  13. wbwanzer

    wbwanzer Member

    Joined:
    Dec 12, 2006
    Messages:
    1,159
    I've had my XDm 9mm for a few years now with zero problems. It would definately be 'go to' gun, in my opinion. I've added fiber optic sights and X-Treme rubber grips. Here's a pic of the grips:
    xtremegrip001.jpg
     
  14. Philo_Beddoe

    Philo_Beddoe Member

    Joined:
    Feb 10, 2009
    Messages:
    328
    Shoot the glock before you buy it, if you have meaty hands, as I do, you might get slide bite from them.
     
  15. tnxdshooter

    tnxdshooter Member

    Joined:
    Oct 29, 2011
    Messages:
    686
    Location:
    Crossville, TN
    From personal experience i have found my xd is head and shoulders above a glock and easier and quicker to break down to boot.

    Sent with Droid Incredible using Tapatalk.
     
  16. Autolycus

    Autolycus Member

    Joined:
    Feb 13, 2006
    Messages:
    5,456
    Location:
    In the land of make believe.
    I am a Glock fan myself. However the M&P series is a great platform. Check out the Smith and Wessons!
     
  17. David E

    David E Member

    Joined:
    Aug 3, 2008
    Messages:
    7,455
    If you say so, but I want to see you remove the slide from the frame one handed....
     
  18. David E

    David E Member

    Joined:
    Aug 3, 2008
    Messages:
    7,455
    You know they make fat grips for 1911's, right? Some wood grips even have finger grooves.
     
  19. jhop73

    jhop73 Member

    Joined:
    Mar 4, 2011
    Messages:
    91
    Location:
    N.W. Ohio
    ended up buying a glock 19C last night
     
  20. dprice3844444

    dprice3844444 member

    Joined:
    Feb 26, 2011
    Messages:
    4,264
    Location:
    se fla i love claymores 01/sot
    get the night sights,ny trigger,extended slide stop,extended mag release.you should beset then.
     
  21. 2WheelsGood

    2WheelsGood Member

    Joined:
    Dec 2, 2010
    Messages:
    623
    What do you use for a holster that fits that sight?
     
  22. Japle

    Japle Member

    Joined:
    Feb 28, 2005
    Messages:
    915
    I use the holster that came with the gun. I tried holsters from Blade-Tech and Comp-Tach, but didn't like them.

    WJPointinholster.jpg
     
  23. 2WheelsGood

    2WheelsGood Member

    Joined:
    Dec 2, 2010
    Messages:
    623
    Ah yeah, thanks. Now that I think about it, the sight is mounted far enough back that it shouldn't interfere with any holster. I have the same gun, by the way. Very nice.
     
  24. 1968

    1968 Member

    Joined:
    Dec 18, 2011
    Messages:
    1
    I own about 20 handguns from .45 cap to .25 caliber. I prefer pistols that have low recoil and are accurate. I like glock 17 for it's low recoil and beretta m9 for low recoil and reliability. I have a kimber .45acp that is very accurate and reliable but it sounds scarier when I fired because of heavier caliber. CZ P07 is very accurate for me. Desert Eagle is so hard to fire accurately but I have one just to play with. I have several CZ, several beretta, several glock models. I like the glock for lighter weight and ease of field strip. Beretta is easy to field strip too. The cz models are hard to field strip. Hk models are nice too. But I will go with glock 17 for the range/home defense and glock 19 for carry daily and sig 230 or sig 232 for light duty carry.
     
Thread Status:
Not open for further replies.

Share This Page