.451 or .452

Status
Not open for further replies.
Usually, you would use .451" jacketed bullets and .452" lead bullets in the .45 Auto.
But I'm sure all the "slug your barrel" guys will be along soon to tell you to do something you really don't need to do.
 
But I'm sure all the "slug your barrel" guys will be along soon to tell you to do something you really don't need to do.

Well don't come whinin to me if you get leading in your barrel...

Sluggin it will tell you EXACTLY what size to order.

You always wanna order .001 - .0015 over your barrel size.
 
Usually, you would use .451" jacketed bullets and .452" lead bullets in the .45 Auto.
But I'm sure all the "slug your barrel" guys will be along soon to tell you to do something you really don't need to do.
+ 1 for 45acp, 45 Colt is another story,
 
Arch is on spot on what he has posted, If you get any leading your pressures don't match your alloy.
 
The website lists bullet for ACP & Colt. OP order COLT bullets to use in a .45 ACP cartridge. Poor choice of bullet even for the 45 Colt. Bearing surface is short & bullet length may not produce best accuracy in a 1911 barrel twist. IMO. Standard lead diameter is .452"
 
It is listed under both their .45 ACP & .45 Colt bullets. It has a crimp groove for .45 Colt, which may or may not interfere with the case mouth placement if loaded for .45 ACP. It is too light IMO for .45 Colt, but usable in .45 ACP, weight wise.

If I wanted to shoot 185 Gr in .45 ACP I would probably choose a RN or SWC. I shoot both the 185 Gr HBRN and SWC from Berrys. No lead that light.

I would lean towards their 200 Gr TrFP or SWC.

The 185 Gr RFP dual design bullet may work just fine though.
 
45 ACP Bullets

Its 180 grain & to me the crimp groove = Colt Bullet.
th_CastBullets_20090207_005.jpg
[/URL][/IMG] No crimp grooves. :)
 
Last edited:
My Saeco 4 cavity .45 ACP mold is for 200 Gr SWC, but I like the look of the Saeco 185 Gr SWC. :)
 
Status
Not open for further replies.
Back
Top