Recent content by mattcat

your case seats on the rim on a .357 not the mouth of the case like a rimless case so your crimp cannot effect their fireing, if your primer pocket is not even (too deap on some cases) you may have the primers in deep enough to not see any differance with a straight edge and still not have them...

when I got my 1911 I also got a progressive press to load for it, it seams that it failed to charge about every 20th case, I finly gave up and retired the progressive press, fortunatly with I am shooting I keep an eye on it and if I try to fire a round and it does not go off I know to check the...

if your using the load data form another bullet type the one thing to make sure of is the seating depth because it can have a big effect on your pressures

I havent used quick design much but I love quick load, so far every load I have checked with it and a crony they have been right on

I could not find it in any of my manuals eather but I did have them in quickdesign so here is what they had the one I have for the .38 long colt is a little dif so here it is too

I like my uniflow masure I have been useing it for about 20years with no major problems, for doing small runs when I cant get to my loading bench I like to use my hunington handheld press and a quinetics powder masure the only thing I dont like about lee dies it the powder through expander...

I have the midnight to 8am shift fri - sun doing janitoral/security guard and the pay sucks, on the bright side when it is quiet they dont mind me being on the comp so I get a chance to catch up on all my reading on here and a couple other forums I am a member on

if you get one on ebay make sure it has the right priming rod (small primer)

I dont know the seat depth on that bullet but according to quick load 9 grains should be a workable load, with a seat dept of .343 you should get 935fps and about 21021psi 12gr unique should give 1150fps at 36106 psi I dont have a manual handy to check the load data against the load of...

true only the police can search you without permition but I have a job that made me sign permition for them to search me and my car if they suspect me of stealing before they would higher me

I think your car can be searched if it is on their property, and if you carry a gun you had better hope you never need to use it there, with them having it posted the way they do you might never see the light of day again if you get caught with it also I must have missed something what is the...

isnt that what the big fight between google and the goverment was about lately, the goverment wanted access to who searched for what and gogle refused

I like the tumbler, I think projects like that are worthwhile even if it ends up costing more than the store bought version because when you are done you know exactly what you have

I dont know how many fps your looking for but you should be able to get about 1500 using the unique, if you use 2400 or H110 you could get up to about 1700fps but if you are using lead you would start getting problems with leading before you got there

if you still have the old shell plate handy you might look to see if there is a burr in the grove for the base of the case, I would be courious to know what is causing the problem