Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Ive got a crossfire II that is going back to the mothership today, previous red dots have all been good for me but this particular vortex was a total dud. First time I had it out it didn't shoot well but also brand new RAR 300BLK/Suppressed so I chalked it up to being all new. Took it out for...
Of the two I'd use Varget for load development but the amount of CFE223 lends itself to longterm use if you found a suitable load for your rifle and distance.
Im not sure that I would want to shoot 10mm (over .40SW velocities/power) in a poly framed gun, just a feeling that I have that may not be true or correct. I load hot stuff but it's in a commander sized 1911 with a supported/ramped barrel.
not a problem with hazmat/primers from Midway about 3 weeks ago but I'm close enough to thier location that I can select the cheap UPS ground and get next day delivery.
...do prefer walnut stocks but laminate is really pretty and I'm ok with synthetic.
.300 blackout, will shoot mostly hand loaded subs @ ~220gr with a **thread on** YHM Phantom (that I already have). Will occasionally run 150gr supers with or without the Phantom. Max distance out to 100yds...
Every airline and airport is just a little bit different. I've never had a problem with loaded mags in the case with the gun, nor 100rds of boxed ammo in the same case.
Too, yes sometimes the bag won't come up on the carousel and you have to visit the airlines luggage counter to take possession...
On my lyman 55 with Unique I only use the largest chamber for the charge, say for 5.0gr in 9mm I don't use the smallest but the middle charge bar and keep them open equally as close as I possibly can. Otherwise I double tap the handle up on the top stroke and let it sit there for a second and...
Funny part is that nothing you bought or are trying to do has anything to with the trigger pull weight.
Be honest...how much bending did you do to the sear spring>
You guys make things way to hard: small base sizing die.
I'd guarantee you that's his problem...his "standard" die isn't sizing to the base, (or isn't setup correctly in the press), or just isn't appropriate for his rifle.
Trying to get a clean primer pocket with a vibe tumbler is problematic in two ways, takes 10+ hours to get to that level of "clean", and then you deal with media in the flash holes. But as you see in this thread, you can have 10 people with 10 opinions and not one is "right" and not one is...
You've already made this 1000x more difficult and costly than it need be. You can download an NFA trust for less than $60 but now there's little advantage of a trust over an individual application, trust only let folks in unfriendly jurisdictions bypass any dealings with their local Sheriff...
As I handload 300Blackout some powders like 1680 I get more blowback than say, H110 (if memory serves) and some of the tricks with the charging handle do work like using a sylicon gasket maker or the gas buster types. Some have holes drilled in the sides to vent. The forward assist type of vent...
When I've had feedling problems and yours sounds similar to a 3 point jam on feeding I narrowed my problem down to not enough crimp. It seemed as long as there was still a feelable lip on the case mouth it would hangup on the roof of the chamber. Think of needing a medium to medium+ crimp over a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.