Not your conventional AR brake, but will tame recoil better than 90% of the tacticool brakes out there. Made from 3/4" 304 stainless. All my long range BR target barrels wear Harrell radial brakes. In the end, I should have spent the $30 to get a radial brake from Harrells. On manual...
I've been working on making a bolt handle jig the past couple weeks and finished a few days ago. Figure I would try it out on my Savage BVTS 22. The end result is pretty darn nice and highly functional. I have a couple refinements to make on the jig and my machining process to make the next...
I've been asked by many people to install muzzle brakes on their barrels and keep turning them down. They are willing to pay. I am not a gunsmith nor do I have an FFL. I do have a lathe and mill and do my own benchrest stuff for myself only. Chamber, brakes, bedding and whatever else I need...
Not sure how many use a DYMO label maker, but I find it sure comes in handy in the reloading room for making all kinds of labels! They vary in price and can be picked up pretty cheap from Amazon and other stores. Label refills come in different colors...
Well, I got my Dillon 550 a couple days ago and finally got around to mounting it on my homemade pedestal stand. Got everything finished and started to set up to make a run of 40 S&W for my M&P. When I ordered the press, I originally ordered Dillon dies. Well the place ran out and gave me a...
I ordered a stripped upper from a vendor a couple weeks ago when their website said it was in stock. Well, I get an email today stating:
"We are unable to complete this order as T***** I******* increased their prices by several hundred dollars so we can't even begin to restock these items at...
I picked up a used Leupold M8 4x pistol scope for a super good price. I was told up from there might be something wrong with it. Well I shook it and there is definitely something rattling inside the tube. The elevation knob is a target style turret and windage is a conventional friction...
I am in the process of making myself some new loading blocks. The wood is very old maple(grandfather stashed during his time 40+ years ago!). I have 2 sizes, the smaller one drilled with a 1/2 forstner bit and the larger is drilled with a 9/16 forstner. The large block will hold magnums and...
I have a set of RCBS carbide dies and want to load 240 JHP bullets. My question is, do I need to expand the case mouth? I want to load as accurate as possible without over working the brass, especially at the mouth.
Is this price OK for the following:
Ruger Super Blackhawk. SS, 7-1/2" barrel, 44 mag, white grips(ivory looking), frame and barrel polished. The guy behind the counter said it was shot very little. I'm sure they all say that, lol. Looked pretty nice and I've been looking for one for a...
So I call the local rip off Gander Mountain store and connect to the firearms department. The guy answers and I simply ask if they have Lyman's 49th edition loading manual. His reply: "Hold on, I'll connect you to the fishing department." LOL! I'm like WHAT? He asks me to repeat. I did and...
I just picked up a factory vintage M700 Varmint Special in 22/250 and ordered some Lapua brass. I do not have the brass yet and I would like to order some neck bushings for my Redding Type S die.
I am looking for .002 neck tension with the Lapua brass. Anyone have an idea what bushings to...
There is a local shop that has a Charles Daly AR lower for $149. I can't seem to find any comparables online since I believe Daly is no longer in business.
Would it be wise to purchase that lower?
I would have about the same amount into a lower if I ordered online since my shop charges...
I am running MBC Bullseye #1 200 SWC, coal 1.225, .003" of crimp, 5 gr 231, mixed range brass and a cci 300 primer.
What is happening is I get one jam in about 15-20 shots. The Kimber is several years old and has about 500 rounds through it. I am wondering if this is a spring issue rather...
I have a Kimber Team Match II with an external extractor. Now, if I send it back to Kimber, will they replace the entire slide in order to convert to an internal extractor?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.