Decided to clean up a topper single shot 12 guage. I plan on painting it with aluma hyde after I sand blast. Well I like to think I'm fairly mechanically inclined, I have had a marlin 336 in pieces and a buddy always calls for help on his 22/45 but this h&r looks like a PIA. Any tips or suggestions?
H&R topper
- Thread starter Dustin0104
- Start date
- Status
Kendal Black
Member
- Joined
- Mar 18, 2011
- Messages
- 1,647
For more than you ever wanted to know about H&R or NEF look here. wwwdot go2gbodotcom/index.php
Scroll down to NEF/H&R centerfire rifles. Look at the frequent ask questions and you will find everything you need.
New here and hope this is acceptable.
Scroll down to NEF/H&R centerfire rifles. Look at the frequent ask questions and you will find everything you need.
New here and hope this is acceptable.
Kendal Black
Member
- Joined
- Mar 18, 2011
- Messages
- 1,647
I found these instructions online:
http://books.google.com/books?id=zR...AEwAQ#v=onepage&q=h&r topper assembly&f=false
Ain't the web grand?
Schematics: http://www.gunpartscorp.com/catalog/Models.aspx?catid=229
Good luck. The H&R has some very good attributes; ease of repair ain't one of them.
http://books.google.com/books?id=zR...AEwAQ#v=onepage&q=h&r topper assembly&f=false
Ain't the web grand?
Schematics: http://www.gunpartscorp.com/catalog/Models.aspx?catid=229
Good luck. The H&R has some very good attributes; ease of repair ain't one of them.
- Status
Similar threads
